Rock Machine eBlizz B70T 29 electric bike, gloss dark forest
Rock Machine eBlizz B70T 29 electric bike
Can handle occasional trips on paved and unpaved roads even in moderate terrain, but with frequent driving, the components will need regular fine-tuning.
Drive |
Bosch PerformanceLine CX, Smart System, 36 V, 250 W, 85 Nm
|
Battery |
Bosch Battery Power Tube 625
|
Display |
Bosch Purion 200
|
Frame |
Al-6061-T6, OLD 148, PM 160, Carrier, Fenders, Kick Stand Ready, UDH, Internal Cable Routing, HT 56/56
|
Fork |
RST Blaze, 1-1/8", 120 mm travel
|
Shifting |
Shimano Altus SL-M315-8R RapidFire Plus, 8 speed
|
Derailleur |
Shimano ESSA RD-U2000
|
Cassette |
Shimano Essa, 8 speed, 11-45T
|
Chain |
KMC e8S
|
Cranks |
ONE1 EC39-BH4-F13-ISIS-L/R, 38T
|
Brakes |
Shimano MT200
|
Brake discs |
SHIMANO SM-RT10, 180mm/180mm
|
Rims |
STARS J30
|
Front hub |
Shimano HB-QC300
|
Rear hub |
Shimano FH-TC500-HM-B
|
Spokes |
Sapim Leader, Stainless Black with secure lock nipples
|
Tires |
Rubena Cheetah 29x2.35"
|
Seat post |
Post Moderne DP-212, Ø 34.9 mm, 170 mm travel
|
Saddle |
Selle Royal Vivo
|
Stem |
TDS-C342 Alloy, 31.8 mm, e45, +3°
|
Handlebars |
Velobel, aluminum riser 40, ergo handlebar
|
Grips |
Herrmans Click DD37
|
Headset |
FSA ZS56/ZS56
|
Pedals |
Flat, Glass Fiber Reinforced Nylon, with reflector
|
Mudguards |
Alloy Full Cover Fenders
|
Bell |
Widek Paperclip e-bike
|
Front light |
AXA Blueline 30
|
Rear light |
Spanning Pling XE
|
Pannier rack |
Delta Carrier, AVS, max. load 27 kg
|
Kick stand |
Atran Velo, Rex
|
Lock |
AXA Block XXL
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x8 |
Groupset | Shimano Altus |
Colour | gloss dark forest |
Material | aluminium |
Wheel diameter | 29" |
Drive | Bosch Performance CX |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 120 mm |
Telescopic seat post | yes |
product ID | 348054 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews