Aluminum road stem AL-7075 with fastening using light titanium screws, which reduce aerodynamic resistance due to their location.
The stem is fully compatible with the SHIMANO Di2 system, either with the DURA-ACE or Ultegra sets, and in combination with the VIBE handlebars, they allow full integration and internal routing of brake and gear cables.
- Slope: -10°
- Fork neck: 1-1/8" (28.6 mm)
- Height: 36.5 mm
- Handlebars: 1-1/4" (31.8 mm)
- Weight: From 125 g (without top cover)
| Colour | black |
| Handlebar diameter | 31.8 mm |
| product ID | 40576 |
Failure to follow these instructions may result in serious injury.
After an accident / impact, replace the product and all related parts.
When mounting on a 1" fork steerer, use the appropriate shim.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use extensions with a higher tightening torque than the recommended value of 5 Nm.
If you are unsure whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor, or visit our website www.pro-bikegear.com.
IMPORTANT!
Carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, extensions, etc.).
Regularly check that the bolts are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 bolts: always tighten alternately crosswise.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (for adjustable stem only):
Adjust the angle.
Tighten to the torque value indicated on the stem.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews