Lapierre OVERVOLT AM 5.6 B625 29/27.5 bicycle, brown
These goods are unavailable
Similar products
You can try these searches
Lapierre OVERVOLT AM 5.6 B625 29/27.5 bike
A full-suspension frame with a revolutionary placement of the center of gravity in the center of the bike and close to the ground? That's the Overvolt AM, thanks to which you can overcome even the highest mountains.Ride the mountains and enjoy the scenery. Drive a demanding downhill, and still perceive the surrounding landscape. This is what the Overvolt AM offers, thanks to which you can overcome even the highest mountains and redefine your limits. The fully-suspended frame with a revolutionary location of the center of gravity in the center of the bike and close to the ground will help you perfectly handle even the most technically demanding trails. The result will be an irreplaceable driving pleasure that you will dream about every night. Until you sit down on Overvolt AM again.
Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Drive |
Bosch Performance CX Gen4 85 Nm Motor
|
Display |
Purion
|
Frame |
Overvolt FS 160 mm travel integrated Bosch Supreme 5 alloy (UDH Dropout)
|
Fork |
RockShox 35 Gold RL 15x110 mm 29" 160 mm 44 mm offset
|
Rear shock |
Lapierre Shock Trunnion 205x60 mm
|
Shifting |
Shimano Deore SL-M5100 11s
|
Derailleur |
Shimano Deore RD-M5100, 11s
|
Cassette |
Shimano Deore CS-M5100 11-51T 11s
|
Chain |
KMC E11 Turbo 11s
|
Cranks |
Lapierre Overvolt ISIS 160 mm (S/M) / 165 mm (L/XL) + E13 steel ring 34T
|
Brakes |
Shimano M4100 4 pistons
|
Rims |
Lapierre eAM+ 32H, front: 622x30 rear: 584x35 Tubeless Ready / Lapierre eAM+ 32H, front: 622x30 rear: 584x35 Tubeless Ready
|
Hubs |
Lapierre DA210, boost 15x110, 32H Center Lock / Lapierre DA210, 4 sealed bearings, boost 12x148, 32H Center Lock
|
Tires |
Maxxis, front: 29x2.5 WT Assegai, 60TPI, EXO+, 3C MaxxGrip, TR / rear: 27.5x2.8 Minion DHR II 60TPI, EXO+, 3C Maxxterra, TR
|
Seatpost |
Lapierre dropper, Ø: 31.6 mm, travel 100 mm (S), 130 mm (M), 150 mm (L/XL) + Shimano lever
|
Saddle |
Selle Royal Vivo
|
Stem |
Lapierre CNC, Ø: 31.8 mm, L: 40 mm (S/M), 45 mm (L/XL)
|
Handlebars |
Lapierre alloy 6061DB, Width: 780 mm, Rise: 15 mm (S/M), Width: 780 mm, Rise: 30 mm (L/XL), Ø: 31.8 mm
|
Grips |
Lapierre grips, S/M: small diameter, L/XL: large diameter
|
Pedals |
VP VPE-527
|
Product details
Battery | 625 Wh |
Drive | Bosch Performance CX |
Model year | 2022 |
Gears | 1x11 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" (front wheel), 27.5" (rear wheel) |
Fork travel | 160 mm |
Material | aluminium |
Fork | Air |
Shock | Air |
Rear travel | 160 mm |
product ID | 151054 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews