Rock Machine Avalanche INT e70-26 electric bike, orange/silver
Rock Machine Avalanche INT e70-26 e-bike
Drive |
Shimano STEPS EP800, 36V, 250W, 85Nm
|
Battery |
DARFON, 504 Wh, in-frame mount
|
Charger |
DARFON 2A Smart charger, charging time up to 7.5 hours
|
Display |
Shimano SC-E5003, Clamp band
|
Frame |
Alloy Al-6061 T6 Custom tubing, Smooth welding, Fat Fun Geometry, Shark Spine EVO 26er Fat, SHIMANO STEPS DU hanger, 2nd Gen. battery integration, 4.8" Tire ready, TapeRed Head Tube, Fat Boost 197x12, Disc Brake Post Mount, Replaceable RD Hanger, Inner Cable Routing, Kick stand and Dropper post ready, RC 470mm
|
Fork |
Fat 26" EVO, Custom Alloy Tubing, 4.8" Tire ready, Fender&Carrier Ready, 1-1/8-1.5", Disc Brake Post Mount, 150x15 Thru axle
|
Shifting |
SHIMANO Deore SL-M5100-IR RapidFire Plus
|
Derailleur |
Shimano Deore RD-M5100 Shadow Plus
|
Cassette |
SHIMANO DEORE CS-M5100-11 11-51T
|
Chain |
KMC X11e EPT
|
Cranks |
Samox ET39-F30-SHEP8 165mm 34T
|
Brakes |
(P/Z) SHIMANO BL-M4100/BR-MT420, 180/180 rotor, hydraulic disc brake, Metallic pads
|
Rims |
Shining SB-80 32H
|
Front hub |
ONE1 KTFTB4 15x150mm
|
Rear hub |
ONE1 KTRYUF 12x190mm
|
Spokes |
Pillar, Stainless Black
|
Tires |
Schwalbe Jumbo Jim, ADDIX SpeedGrip 26x4.8"
|
Seat post |
ONE1 Alloy, MT171, dropper post 150&170mm travel, 30.9x440mm&480mm
|
Stem |
ONE1 TDS-D607 Alloy, 35xE35mm, 0°
|
Handlebars |
ONE1 Alloy, MTB AL-3520BT, 6° upsweep, 9° backsweep, 20mm rise, 760mm, 35mm
|
Grips |
Velo VLG-1879D2, Ergo Grip
|
Headset |
ACROS AZX-251, Zero Stack, 1-1/8“x1.5“, BlockLock
|
Pedals |
Marwi SP-160
|
Max. supported speed |
25 km/h
|
Charging cycles |
1000 / 60% of original capacity
|
Range |
120 km (ECO mode) w/EP8 range 20% up
|
Number of speeds |
1×11, 34×11-51, 464 %
|
Model year | 2022 |
Gears | 1x11 |
Size | 15" (S), 17" (M), 19" (L) |
Weight | 24.2 kg (size M ) |
Material | aluminium |
Wheel diameter | 26" |
Drive | Shimano STePS EP8 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
Fork travel | 0 mm |
product ID | 144506 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews