Mondraker Crafty Carbon RR 29 electric bike, carbon/orange
These goods are unavailable
Similar products
You can try these searches
Mondraker Crafty Carbon RR 29 electric bike
Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Drive |
Bosch Performance Line CX Cruise (25 Km/h) Smart System
|
Battery |
Bosch Powertube 750 Wh
|
Frame |
Crafty Stealth Air full Carbon, e-Bike Optimized Zero Suspension System, 150 mm travel, Forward Geometry, internal non-removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 17 mm axles, integrated dropout speed sensor, exclusive plastic motor covers.
|
Fork |
Fox 38 29 Float GRIP2 Factory Kashima, 160 mm, e-bike optimized, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset, 68 mm OD crown. Settings: high and low-speed compression, high and low-speed rebound, air preload
|
Rear shock |
Fox Float-X LV Factory Kashima, 205x65 mm. Settings: compression 2 positions lever, low-speed compression, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
|
Shifting |
Sram Trigger GX Eagle, 12s, X-Actuation 1:1, single click
|
Derailleur |
Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
|
Cassette |
SRAM XG-1275, 10-52T, 12s
|
Chain |
SRAM NX Eagle, 12s, Powerlock
|
Cranks |
Race Face Aeffect ebike, 165 mm
|
Brake levers |
Sram Code RSC, SwingLink and lever pivot bearings, tools-free reach and contact point adjustment
|
Rims |
Mavic E-Deemax S 29, 30 mm internal width, Maxtal welded, PFP, tubeless, 28 spokes
|
Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratched system, IS 6 bolts, XD freehub
|
Spokes |
Mavic straight-pull double butted, contactless lacing
|
Tires |
F: Maxxis Minion DHF 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120 TPI, folding bead
R: Maxxis Minion DHR II 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120 TPI, folding bead |
Seatpost |
Fox Transfer Factory Kashima internal, diameter 31.6 mm, S size: 363.5x125 mm, M/L size: 418.3x150 mm, XL size: 475.1x175 mm
|
Saddle |
FIZIK Terra Aidon X5 145 mm
|
Stem |
Onoff Krypton FG 30 mm, CNC, 31.8 mm barrel
|
Handlebars |
Onoff Krypton Carbon 1.0, rise: 25 mm, width: 800 mm, 9º backsweep, 5º upsweep, 31.8 mm barbore
|
Headset |
Acros custom for 1-1/2
|
Product details
Sex | Men, Unisex |
Battery | 756 Wh |
Drive | Bosch Performance CX |
Model year | 2023 |
Groupset | SRAM X01, SRAM GX |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" |
Fork travel | 160 mm |
Material | carbon fiber |
Size | S, M, L, XL |
Colour | carbon/orange |
Fork | Air |
Shock | Air |
Rear travel | 150 mm |
product ID | 223465 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews