Giant Trance X E+ 1 Pro 29 electric bike, amber glow
Giant Trance X E+ 1 Pro 29 electric bike
Drive |
Giant SyncDrive Pro powered by Yamaha, 80 Nm, 250 W
|
Battery |
Giant EnergyPak Smart 625 Wh, 36 V, 17.3 Ah, Lithium-ion
|
Frame |
ALUXX SL Aluminum, Maestro suspension, travel 140 mm, flip chip, mid-engine, integrated battery (removal from the bottom), compatibility with the EnergyPak Plus battery
|
Fork |
FOX 36 Float Performance Elite, travel 150 mm, FIT 4 damping, Boost solid axle 15x110 mm, 44 mm offset
|
Shock |
FOX Float DPX2 Performance EVOL, size 185x52.5 mm, tuned for Giant
|
Shifting |
Shimano Deore XT I-spec EV, gears 1x12
|
Derailleur |
Shimano Deore XTR Shadow+
|
Cassette |
Shimano M7100-12, 10-51 teeth
|
Chain |
KMC e12 Turbo, EcoProteq, specially for electric bikes
|
Cranks |
Praxis e-Cadet+ (Q-factor = 168 mm), Praxis Wave 36 tooth derailleur (high quality steel 4130), MRP 1X chain guide
|
Brakes |
Shimano Deore XT, 4-piston, discs 203 mm
|
Brake levers |
Shimano Deore XT I-spec EV
|
Rims |
Giant e-TR1 29 Wheelsystem, 30 mm internal width
|
Hubs |
Giant e-TR1 29 Wheelsystem, Fixed axle Boost 15x110 and 12x148 mm
|
Spokes |
Giant e-TR1 29 Wheelsystem
|
Seat post |
Giant Contact Switch, telescopic, 30.9 mm (S: 125, M: 150, L/XL: 170 mm)
|
Saddle |
Giant Romero Trail
|
Stem |
Giant Contact SL 35
|
Handlebars |
Giant Contact 35 Trail, 780 mm
|
Cloak |
front: Maxxis Assegai 3C MaxxTerra EXO TR, 29x2.6"
rear: Maxxis Dissector 3C MaxxTerra EXO+ TR, 29x2.6" |
Accessories |
charger Giant EnergyPak 6A Smart Charger and kit for tubeless operation
|
Model year | 2023 |
Gears | 1x12 |
Material | aluminium |
Wheel diameter | 29" |
Drive | Yamaha |
Battery | 756 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 150 mm |
Shock | Air |
Rear travel | 140 mm |
product ID | 191191 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews