GHOST E-TERU Essential 29 bike, dark grey/dark orange matt
GHOST E-TERU Essential 29 bike
The fine-tuned combination of refined design, powerful Bosch Performance engine, 120 mm of travel and 29-inch wheels will ensure you conquer any terrain without any problems. Ghost E-Tera is simply a companion in discomfort that you can rely on. While driving, you can change the assistance modes depending on how much assistance you need. All driving data such as distance, speed, battery charge status or level of assistance are shown on the easy-to-read display.Can handle occasional trips on paved and unpaved roads even in moderate terrain, but with frequent driving, the components will need regular fine-tuning.
Drive |
Bosch Performance Cruise
|
Battery |
Bosch Power Tube 500 Wh
|
Charger |
Bosch Charger 2 Ah
|
Display |
Bosch Purion
|
Frame |
E-TERU AL
|
Fork |
SR Suntour XCM34 Boost DS 120 mm
|
Derailleur |
Shimano Alivio RD-M3100, 9-speed
|
Cassette |
Shimano CS-HG-200-9, 11-36T
|
Chain |
KMC e9S
|
Cranks |
Miranda 38T
|
Brakes |
Shimano BR-MT200 180 mm Disc / Shimano SM-RT10 180 mm
|
Brake levers |
Shimano BL-MT200
|
Rims |
Schürmann Craft Disc 30
|
Hubs |
Shimano HB-MT400-B 15x110 mm / Shimano FH-MT400-B 12x148 mm
|
Tires |
Schwalbe Smart Sam 29x2.6
|
Seat post |
XLC Ø 31.6 mm
|
Saddle |
Selle Royal 2315 HRN
|
Stem |
Ground Fiftyone, Ø 31.8 mm
|
Handlebars |
Ground Fiftyone, Ø 31.8 mm, S 720 mm, rise 20 mm; M/L: 740 mm, rise 27 mm; XL: 760 mm, rise 40 mm
|
Grips |
XLC Ergo
|
Pedals |
VPE-527
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x9 |
Groupset | Shimano Alivio |
Colour | dark grey/dark orange matt |
Material | aluminium |
Wheel diameter | 29" |
Drive | Bosch Performance Cruise |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 120 mm |
product ID | 141434 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews