Marin Alpine Trail E1 29/27.5 e-bike, green/black
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
Marin Alpine Trail E1 29/27.5 electric bike
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
| Drive |
Shimano STEPS E7000
|
| Battery |
BT-8035, Internal 504 Wh
|
| Charger |
Shimano Battery Charger EC-E6002
|
| Display |
SC-E7000 Display
|
| Frame |
All New Series 4 Alloy Frame, 150 mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
|
| Fork |
Rock Shock 35 Gold RL 29”, Motion Control Damper, 160 mm Travel, Maxle Stealth Axle, 44 mm Offset
|
| Shock |
Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65 mm, 25 mm x M8 Lower Hardware, S/M Spring Rate = 300 lb, L/XL Spring Rate = 400 lb
|
| Shifting |
Shimano Deore, I Spec EV, 10-Speed
|
| Derailleur |
Shimano Deore, Direct Attachment, 10-Speed
|
| Cassette |
Shimano Deore 10-speed 11-46T
|
| Chain |
KMC X-10E, Silver
|
| Crankset |
Marin Forged Alloy 165 mm Length, Narrow Wide 38T Chainring
|
| Brakes |
F: Shimano MT420, 4-Piston Hydraulic Disc Brake, 203 mm Rotor
R: Shimano MT420, 4-Piston Hydraulic Disc Brake, 203 mm Rotor w/ Speed Sensor |
| Brake levers |
Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
|
| Rims |
Front: Marin Aluminium Double Wall, 29" Diameter, 32 mm Inner Rim Width, Pinned Joint, TLR
Rear: Marin Aluminium Double Wall, 27.5" Diameter, 38 mm Inner Rim Width, Pinned Joint, TLR |
| Front hub |
F: Shimano MT-410B, 110x15 mm, centerlock Disc, 32H
R: E-Bike Specific Design, 148x12 mm, Quad Sealed Bearings, Disc, 32H, Standard Freehub Body |
| Spokes |
14g Black Stainless Steel
|
| Tires |
F: Maxxis Assegai 29x2.5", 3C MaxxTerra, Double Down, Tubeless Compatible
R: Maxxis Minion DHR II 27.5x2.8", 3C Maxx Terra, EXO+, Tubeless Compatible |
| Seat post |
TranzX YSP23J, 30.9 mm, Travel S=125 mm, M/L=150 mm, XL=175 mm
|
| Saddle |
Marin E-MTB Saddle
|
| Stem |
Marin 3D Forged Alloy, 35 mm
|
| Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminum, 780 mm Width, 28 mm Rise, 5º Up, 9º Back
|
| Grips |
Marin Single Clamp Locking
|
| Headset |
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Pedals |
Marin MTB Plastic
|
| Controlling |
SW-E7000 Left Hand Switch for Assist Mode Change
|
| Accessories |
e13 Plus Chainguide, Aluminum Plate
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x10 |
| Groupset | Shimano Deore |
| Size | S, M, L, XL |
| Colour | black |
| Material | aluminium |
| Wheel diameter | front: 29" /rear: 27.5" |
| Drive | Shimano STePS E7000 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 160 mm |
| Rear travel | 150 mm |
| Dropper post | yes |
| Shock type | Spring |
| Control type | mechanical |
| product ID | 231535 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews