Raymon TrailRay 160E 11.0 29 e-bike, nebular blue
Bike fitting discount 50 % (you will save 70 €)
Raymon TrailRay 160E 11.0 29 electric bike
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
| Motor |
Yamaha PW-X3, 250 W, 85 Nm
|
| Fork |
FOX Float 38 Factory, Grip 2, 170 mm, tapered
|
| Shifting |
SRAM GX Eagle, Single Click
|
| Derailleur |
SRAM GX Eagle, 12 speed
|
| Cranks |
R Raymon EC40, Aluminum, ISIS
|
| Brakes |
SRAM Code R
|
| Brake discs |
SRAM Centerline, 200mm/200mm
|
| Wheels |
NEWMEN Evolution A.30, Tubeless ready, Center Lock, 15x110/12x148 mm
|
| Tires |
Schwalbe Magic Mary, Evolution, 62-622, 29x2.4", Tubeless Ready
|
| Seat post |
R Raymon, 34.9mm, Dropper Post
|
| Saddle |
R Raymon MTB
|
| Stem |
R Raymon 35 mm, 0°, Ahead
|
| Handlebars |
R Raymon Riser 35 mm, 780 mm, Sweep: 9°, Rise: 20 mm
|
| Sex | Men, Unisex |
| Model year | 2024 |
| Gears | 1x12 |
| Groupset | SRAM GX |
| Colour | nebular blue |
| Material | aluminium |
| Wheel diameter | 29" |
| Drive | Yamaha |
| Battery | 720 Wh |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 170 mm |
| Rear travel | 160 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 350808 |



All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Price-performance ratio at 1*
Automatically translated