Marin Alpine Trail E1 29/27.5 e-bike, green/black, test
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
Marin Alpine Trail E1 29/27.5 electric bike
Test bike. May show signs of use and wear. It will be checked and adjusted by our mechanic before sale.Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
| Drive |
Shimano EP6, 250 W, 85 Nm
|
| Battery |
BT-8036, Internal 630 Wh
|
| Display |
SC-E600 Display
|
| Frame |
Series 4 Alloy Frame, 150 mm Multitrac Suspension, Integrated Battery/Charging Port, 148 mm Rear Thru-Axle, Built-in Rear Speed Sensor
|
| Fork |
X-Fusion Trace 36 RC, 160 mm Travel, 29", 110x15 mm Bolt-On Axle, 44 mm Offset
|
| Shock |
Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300 lb, L/XL Spring Rate = 400 lb
|
| Shifting |
Shimano Deore, 11-Speed, I Spec EV
|
| Derailleur |
Shimano Deore, Direct Attachment, 11-Speed, SGS
|
| Cassette |
Sunrace 11-Speed, 11-51T
|
| Chain |
KMC X-10E, Silver
|
| Crankset |
Shimano EM600, 160 mm Length
|
| Brakes |
Shimano MT420, 4-Piston Hydraulic Disc Brake, Metallic Pads, 203 mm/203 mm Rotor
|
| Front rim |
Marin Aluminum Double Wall, 29" Diameter, 32 mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
|
| Rear rim |
Marin Aluminum Double Wall, 27.5" Diameter, 38 mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
|
| Front hub |
Shimano MT-410B, 110x15 mm, centerlock Disc, 32H
|
| Rear hub |
Shimano HB-MT400B, 148x12 mm, Centerlock, Standard Freehub Body
|
| Front tire |
Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible
|
| Rear tire |
Vee Tire Co Crown Gem, 27.5x2.8”, Tackee Compound, Tubeless Compatible
|
| Seat post |
TranzX, YSP23JL, 1x Remote, Size S 150 mm Travel, Size M and L 170 mm Travel, Size XL 200 mm Travel, 30.9 mm
|
| Saddle |
Marin E-MTB Saddle
|
| Stem |
Marin 3D Forged Alloy, 35 mm
|
| Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminum, 780 mm Width, 28 mm Rise, 5º Up, 9º Back
|
| Grips |
Marin Grizzly Lock On
|
| Headset |
FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Pedals |
Marin MTB Plastic
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | Shimano Deore |
| Colour | green/black |
| Material | aluminium |
| Wheel diameter | front 29"/rear 27.5" |
| Drive | Shimano STePS EP6 |
| Battery | 630 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 160 mm |
| Rear travel | 150 mm |
| Dropper post | yes |
| Shock type | Air |
| product ID | 387015 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 160 cm | 160 - 170 cm | 170 - 180 cm | 180 - 191 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews