Lapierre Overvolt GLP Elite B500, model 2021
Lapierre GLP II (Gravity Logic Project) is a revolutionary enduro e-bike that takes e-bike riding to new heights.
The combination of a rigid and lightweight carbon frame, low center of gravity and weight, which is ideally distributed in the middle between the wheels, significantly improves handling and driving characteristics.
The GLP II with the Bosch Performance CX GEN 4 engine is a truly exceptional sports e-bike, which is distinguished by its innovative design, maneuverability and natural riding characteristics.
Category: MTB FULLY
Year: 2021
Wheel size: 29
Frame: OVERVOLT 160mm INTEGRATED BOSCH CARBONE BOOST
Fork: RockShox ZEB CHARGER RC 29 '' BOOST 15x110 170mm 44mm OFFSET
Derailleur: SHIMANO XT 12spd
Cranks: E13 E-spec + Alloy 160 (S / M) / 165mm (L / XL) + E13 Alloy Ring 34T
Cassette: SHIMANO SLX 10-51T
Chain: SHIMANO SLX 12s
Brakes: SHIMANO XT 4 pistons
Head composition: FSA Orbit 1.5 ZS NO.57SC / NO.57T
Handlebars: Lapierre ALLOY 6061DB Ø: 31.8mm W: 760mm W: 15mm (S / M) W: 780mm W: 30mm (L / XL)
Grips: Lapierre GRIPS S / M: Small Diameter L / XL: Large Diameter
Stem: Lapierre CNC Ø: 31.8mm L: 40mm (S, M) 45MM (L, XL)
Seatpost : JD DROPPER "RAD Travel adjust" Ø: 31.6mm travel: 125mm (S) 150mm (M / L) 170mm (XL)
Saddle: Lapierre by VELO
Pedals: VP VPE-527
Wheels: SHIMANO SMRT70 203mm
Muffler: RockShox SUPER DELUXE SELECT + RT TRUNNION 205x60MM
Front fork stroke: 170
Rear stroke: 160
Battery: BOSCH PERFORMANCE CX GEN4 500Wh POWERPACK PURION
Front sprocket: Lapierre EAM + ALLOY 32H: 622x33c J-bend
Rear sprocket: Lapierre EAM + ALLOY 32H: 584x35c J-bend
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX |
Material | carbon fiber |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 122410 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews