Lapierre Overvolt AM 8.6 B625, model 2021
The patented Supreme 5 alloy frame with a low sloping top tube provides plenty of space and does not restrict the rider in any way with geometry that reflects modern, contemporary trends. This true all-mountain machine with 160mm of travel is ready to iron out any broken terrain.
The front 29-inch wheel guarantees precise directional stability and cross-country ability, and the 27.5+ inch rear wheel, thanks to its width, guarantees maximum grip, more effective braking, comfort and safety. The result of this combination is that our e-bikes excel with perfectly coordinated stability and traction on any surface.
Lapierre Overvolt AM 8.6 – the combination of the powerful Bosch Performance CX 4th generation engine, 625Wh battery, great control and driving characteristics is a guarantee of endless "e-fun".
Now available to everyone!
Category: MTB FULLY
Year: 2021
Wheel size: 27.5
Frame: OVERVOLT 160mm INTEGRATED BOSCH CARBONE BOOST
Fork: FOX 38 FLOAT FACTORY 29'' BOOST 15x110 160mm 44mm OFFSET / 3 POS LEVER
Derailleur: SHIMANO XT 12spd
Cranks: E13 E-spec + Alloy 160 (S / M) / 165mm (L / XL) + E13 Alloy Ring 34T
Cassette: SHIMANO SLX 10-51T
Chain: SHIMANO SLX 12s
Brakes: SHIMANO XT 4 pistons
Head composition: FSA NO.55R / 57E, Anode black 1-1 / 8" -1.5"
Handlebars: Lapierre ALLOY 6061DB Ø: 31.8mm W: 760mm R: 15mm (S / M) W: 780mm R: 30mm (L / XL)
Grips: Lapierre GRIPS S / M: Small Diameter L / XL: Large Diameter
Stem: Lapierre ALLOY Ø: 31.8mm L: 40mm (S, M) 45mm (L, XL)
Seatpost : JD DROPPER" RAD Travel adjust" Ø: 31.6mm travel: 125mm (S) 150mm (M) 170mm (L / XL)
Saddle: Lapierre by VELO
Pedals: VP VPE-527
Reels: SHIMANO FT: SMRT64 203mm RR: RTEM600 with Magnet 203mm
Damper: FOX DPX2 FLOAT FACTORY TRUNNION 205x60MM Comp Adju st
Front fork travel: 160
Lift of rear structure: 160
Battery: BOSCH PERFORMANCE CX GEN4 625Wh POWERTUBE + KIOX Display / LP Bracket
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX |
Material | carbon fiber |
Drive | Bosch Performance CX |
Battery | 625 Wh |
Brakes | Hydraulic disc brakes |
product ID | 122409 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews