Kellys Theos 60, blue, model 2019
Bike fitting discount 50 % (you will save 70 €)
frame size M / L / XL
SHIMANO STEPS E8000 engine
SHIMANO SW-E7000 gear unit switch for motor assis
SHIMANO SC-E 7000 cycling computer
battery SHIMANO BT-E8010, 36V / 504Wh / capacity 14Ah
fork ROCK SHOX Yari RC (27.5) Boost, 150mm, DebonAir / Motion Control RC / Maxle Stealth 15mm thru axle
rear silencer ROCK SHOX Monarch RT, Solo Air / Rapid Recovery / Open-Pedal (200x57mm)
main composition FSA 1.5 integrated
cranks SHIMANO FC-E8000 (34) - length 170mm
shifting SHIMANO SLX M7000 Rapidfire Plus / SW-E7000 switch for motor assist
SHIMANO Deore XT M8000 converter (direct mount)
number of transfers 11
cassette pinion SHIMANO SLX CS-M7000-11 (11-46)
chain KMC X11e (110 links)
brakes SHIMANO Deore XT M8020 Hydraulic Disc
brake discs front 203mm / rear 203mm
SHIMANO Deore XT BL-M8000 brake levers
NOVATEC Disc hubs (15x110mm / 12x148mm / 32 holes)
fixed axle ROCK SHOX Maxle Stealth 15x110mm front / NOVATEC 12x148mm rear
rims KLS Valor 2 Disc 584x27 (32 holes)
string stainless steel black
front tires SCHWALBE Magic Marry 65-584 (27.5x2.60) SnakeSkin, Tubeless Easy, ADDIX Soft, folding / rear SCHWALBE Hans Dampf Evo 65-584 (27.5x2.60) SnakeSkin, Tubeless Easy, ADDIX Speedgrip, folding
stem RACE FACE Aeffect R 35 - diam 28.6mm / bar bore 35mm / 0 ° / length 50mm
handlebars RACE FACE Aeffect R 35 RiseBar - diam 35mm / rise 20mm / width 780mm
handles KLS Poison
seatpost KS - Remote Telescopic - diam 31.6mm / length 485mm, stroke 150mm
saddle KLS Styx
KLS Master pedals
weight kg 21.64 (L)
| Model year | 2019 |
| Gears | 1x11 |
| Groupset | Shimano XT, Shimano SLX, Shimano Deore |
| Material | aluminium |
| Drive | Shimano STePS E8000 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 69354 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews