Giant Full E + 3, model 2018
AluxX SL Aluminum frame, Maestro suspension, 140 mm travel
Fork SR Suntour Zerona 35 LO-R 27.5+, travel 140 mm, Boost fixed axle 15x110 mm (Quick-Loc), OverDrive column
Damper SR Suntour UnAir LO-R, Trunnion Mount
Giant Connect Trail handlebars, width 780 mm
Giant Connect stem, length: S = 50 mm, M / L = 60 mm, XL = 70 mm
Giant Connect seat post
Giant Contact Neutral saddle
Giant Original MTB-Sport pedals, aluminum, platform, replaceable pins
Shift Shimano Deore, gears 1x10
Derailleur Shimano Deore Shadow +, gears 1x10
Brakes Tektro Orion (HD-M745), four-piston, discs 203 mm
Brake levers Tektro Orion (HD- M745)
Cassette Sunrace CS-MS2, 11-42 teeth
KMC X.10e chain
Samox AONE cranks, Boost 1x spider, 38-tooth gear
Giant GE35 rims, tubeless, inner rim width 35 mm
Giant eTracker Boost hubs, encapsulated bearings, fixed axles 15x110 / 12x148 mm
Stainless steel wires
Maxxis REKON EXO TR Double Compound tires, 27.5x2.6 ", tubeless
Accessories Giant EnergyPak 4A fast battery charger
Giant SyncDrive Sport motor, powered by YAMAHA, 80 Nm, 250 W
Sensors Giant PedalPlus 4-sensor technology
Giant RideControl Charge control unit, control part of the grip, walk assist function, micro USB connector
Battery Giant EnergyPak 400 Wh, 36 V, 11.3 Ah, Li-Ion
Model year | 2018 |
Gears | 1x10 |
Battery | 400 Wh |
product ID | 76208 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews