CUBE Stereo Hybrid 140 HPC TM 27.5 e-bike, flashgrey/olive
Bike fitting discount 100 % (you will save 140 €) Free
CUBE Stereo Hybrid 140 HPC TM 27.5 electric bike
| Motor |
Bosch Drive Unit Performance CX Generation 4 (85 Nm) Cruise (250 Watt), Smart System
|
| Battery |
Bosch PowerTube 625 Wh
|
| Display |
Bosch Kiox 300
|
| Frame |
C:62 Monocoque Advanced Twin Mold Technology, Aluminum 6061 T6 Rear Triangle, Efficient Trail Control, FSP 4-Link, Agile Trail Geometry, Boost 148, UDH™, Full Integrated Battery, Advanced Internal Cable Routing
|
| Fork |
FOX 36 Float GRIP, 3-Position w/Micro Adjust, Tapered, 15x110 mm, E-Bike Optimized, 150 mm
|
| Shock |
FOX Float X, 205x60 mm, Trunnion Mount, Adjustable LSR w/ 2-Pos. Lever
|
| Shifting |
SRAM GX Eagle™ Trigger, Single Click
|
| Derailleur |
SRAM GX Eagle, 12-speed
|
| Cassette |
SRAM XG-1275 Eagle, 10-52T
|
| Chain |
SRAM NX Eagle
|
| Cranks |
ACID E-Crank, 165 mm, 34T
|
| Brakes |
Magura MT7, Hydr. Disc Brake (203mm/203mm)
|
| Wheels |
Newmen Performance 30, 28/28 Spokes, 15x110 mm/12x148 mm, Tubeless Ready
|
| Front tire |
Maxxis Assegai, MaxxGrip/EXO+, Tubeless Ready, 2.5 WT
|
| Rear tire |
Maxxis Minion DHR II, MaxxGrip/DoubleDown, Tubeless Ready, 2.4 WT
|
| Seat post |
CUBE Dropper Post, Handlebar Lever, Internal Cable Routing, 31.6 mm (M: 125 mm, L,XL: 150 mm)
|
| Stem |
CUBE Performance Stem E-MTB, 31.8 mm
|
| Handlebars |
Newmen Evolution SL 318.25, 800 mm
|
| Grips |
ACID Disrupt, Soft Compound
|
| Headset |
Acros AZF-1035, ICR (Integrated Cable Routing), BlockLock 120°, Top Zero-Stack 1 1/2" (ZS 56 mm), Bottom Zero-Stack 1 1/2" (ZS 56 mm)
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX |
| Colour | flashgrey/olive |
| Material | carbon fiber |
| Wheel diameter | 27.5" |
| Drive | Bosch Performance CX |
| Battery | 625 Wh |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 150 mm |
| Rear travel | 140 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 358864 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews