CUBE Stereo Hybrid 140 HPC Race 750 27.5 e-bike, grey/chrome
Bike fitting discount 50 % (you will save 70 €)
CUBE Stereo Hybrid 140 HPC Race 750 27.5 e-bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
| Motor |
Bosch Drive Unit Performance CX Generation 4 (85 Nm) Cruise (250 Watt), Smart System
|
| Battery |
Bosch Powertube 750 Wh
|
| Display |
Bosch Kiox 300
|
| Frame |
C:62® Monocoque Advanced Twin Mold Technology, Aluminum 6061 T6 Rear Triangle, Efficient Trail Control, FSP 4-Link, Agile Trail Geometry, Boost 148 mm, UDH™, Fully Integrated Battery, Advanced Internal Cable Routing
|
| Fork |
RockShox 35 Silver TK Air, Tapered, 15x110 mm, eMTB Approved, 150 mm, Lockout
|
| Shifting |
Shimano Deore SL-M6100, Rapidfire-Plus
|
| Derailleur |
Shimano XT RD-M8100-SGS, ShadowPlus, 12 speed
|
| Cassette |
Shimano Deore CS-M6100, 10-51T
|
| Chain |
Shimano CN-M6100
|
| Cranks |
Acid E-Crank, 165 mm (27.5: 36T/29: 34T)
|
| Brakes |
SRAM DB8, Hydr. Disc Brake (203/203 mm)
|
| Rims |
CUBE EX30, 32H, Disc, Tubeless Ready
|
| Front hub |
CUBE Engineered By Newmen, 15 mm, Boost, Centerlock
|
| Rear hub |
CUBE Engineered By Newmen, 12 mm, Boost, Centerlock
|
| Tires |
Schwalbe Nobby Nic, PerfL, 2.6
|
| Seat post |
CUBE Dropper Post, Handlebar Lever, Internal Cable Routing, 31.6 mm
|
| Saddle |
Wreath
|
| Stem |
CUBE Performance Stem E-MTB, 31.8 mm
|
| Handlebars |
Newmen Evolution SL 318.25, 760 mm
|
| Grips |
ACID React Pro
|
| Headset |
Acros AZF-1035, ICR (Integrated Cable Routing), BlockLock 120°, Top Zero-Stack 1 1/2" (ZS 56 mm), Bottom Zero-Stack 1 1/2" (ZS 56 mm)
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano Deore |
| Colour | grey/chrome |
| Material | carbon fiber |
| Wheel diameter | 27.5 mm |
| Drive | Bosch Performance CX |
| Battery | 750 Wh |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 150 mm |
| Rear travel | 140 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 358682 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews