Corratec E-Power RS 150 PRO 650B +
Bike fitting discount 50 % (you will save 70 €)
Fork: Rockshox YARI RC Travel suspension: 150mm
Rear silencer: Rockshox DELUXE RT RSuspension travel: 150mm
Brakes: Magura MT5frontSize brake disc: 203 mmMaterial: Carbotecture ®, Flip-Flop-Design
Stem: ZZYZX SL Alloy Material: Alloy
Handlebars: ZZYZX SL Alloy Material: Alloy
Seat: Selle Italia X3
Seatpost: Kindshock E20i Outer diameter: 31.6mm
Converter: ZZYZX E-Power Crank Number of chainrings; Ratio: 2s; 50/34
Cassette: Shimano M700 SLX Number of pinions; Ratio: 11s; 11-13-15-17-19-21-24-28-32-37-46
Derailleur: Shimano DEORE XT
Gear: Shimano M7000 SLX
Rims: ZZYZX Cross Attack 650BRim outer diameter: 27.50zoll
Tires: Schwalbe Nobby Nic PlusInside diameter: 27.50zollWidth: 70mmType of tires: PLUS
Converter gears: 2s; 50/34
Cassette gears: 11s; 11-13-15-17-19-21-24-28-32-37-46
Fork stroke: 150 mm
Rear shock stroke: 150 mm
Brake Disc Size: 203 mm front203 mm rear
Engine: BOSCH Performance CX Max speed: 25km / hPower: 250wattTorque: 75Nm J
Battery: BOSCH Power Tube 500 W / h Energy: 500wh
| Gears | 2x11 |
| Material | aluminium |
| Drive | Bosch Performance CX |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 73825 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews