Corratec E-Power RS 150 29 CX, model 2018
Bike fitting discount 50 % (you will save 70 €)
Fork: Manitou Machete 140mm +
Brakes: Shimano M315 front + // Shimano M315 rear ++
Handlebars: ZZYZX 780mm +
Seatpost : Corratec Black Cromo Rail +
Saddle: Corratec Twin Bolt 31.6 x 350 mm +
Chain: Lasco 15T +
Cassette: Shimano HG50 10s +
Rear derailleur: Shimano XT 10s
Rims: Mach1 Klixx +
Tires: Continental X King 2.4 +
Stroke: 140 mm // 150 mm
Brake size: 200 mm front // 200 mm rear
Engine: BOSCH Performance CX +
Battery: BOSCH Power Tube 500 W / h +
| Model year | 2018 |
| Gears | 1x10 |
| Material | aluminium |
| Drive | Bosch Performance CX |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 59093 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Može být tento bycikl i pre dámy?
Bez problému môže, je to ale L-ko tak by dáma mala byť vyššia.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews