Rock Machine Blizz e40-29 electric bike, matte red/black
Bike fitting discount 20 % (you will save 28 €)
Rock Machine Blizz e40-29 electric bike
Can handle occasional trips on paved and unpaved roads even in moderate terrain, but with frequent driving, the components will need regular fine-tuning.
| Drive |
SHIMANO STEPS EP600, 36 V, 250 W, 85 Nm, Auto Shift compatible
|
| Battery |
DARFON, 36 V, 504 Wh, integrated
|
| Display |
SHIMANO SC-EM800, Clamp band
|
| Frame |
Alloy Al-6061 T6 Custom tubing, Smooth Welding, Trail Ultimate Geometry, Shark Spine EVO 29er&27.5+, Shimano STEPS DU hanger, 2nd Gen. Battery Integration, BOOST 148x12, Post Mount, Replaceable RD Hanger, Inner Cable Routing, Adjust. seat post ready
|
| Fork |
RST Vibe, Tapered, Air, 140 mm travel
|
| Shifting |
microSHIFT ACOLYTE SL-M7180-R, 8-speed
|
| Derailleur |
microSHIFT ACOLYTE RD-M5185M
|
| Cassette |
microSHIFT ACOLYTE CS-H083, 12-46T
|
| Chain |
KMC e8S
|
| Crankset |
Shimano EM600, 170 mm, 34T
|
| Brakes |
CLARKS CLOUT+, oversize piston, hydraulic disc brake, CLARKS CL 180
|
| Rims |
Stars J30D, 32H
|
| Front hub |
SHIMANO HB-MT400-B, 32H, CENTER LOCK, 15x110 mm/12x148 mm THRU Type AXLE
|
| Spokes |
Sapim Leader, Stainless Black with secure lock nipples
|
| Tires |
WTB Ranger Comp, 29x2.30"
|
| Seat post |
ONE1 Alloy, MT171, dropper post 170 mm, 30.9 mm
|
| Saddle |
WTB Volt Sport
|
| Stem |
ONE1 TDS-ALD606 Alloy, 35 mm, 0°
|
| Handlebars |
ONE1 Alloy, 9° backsweep, 20 mm rise, 760 mm, 35 mm
|
| Grips |
Velo ERGO
|
| Headset |
ACROS ZS44/EC49
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x8 |
| Groupset | microSHIFT Acolyte |
| Size | XL |
| Colour | matte red/black |
| Material | aluminium |
| Wheel diameter | 29" |
| Drive | Shimano STePS EP6 |
| Battery | 504 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 140 mm |
| Dropper post | yes |
| Control type | mechanical |
| product ID | 271817 |
| Bike size | M | L | XL |
|---|---|---|---|
| Height (cm) | 160 - 175 cm | 175 - 185 cm | 185 - 200 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews