MONDRAKER PRIME 29, MARLIN BLUE/BLACK
New model -9% Mondraker Prime 29 e-bike, nimbus grey/bronze/vortex grey
3,449 €
-9%
RRP 3,799 €
-23% Superior eXP 9019 B 29 electric bike, gloss copper/matte black
3,399 €
-23%
RRP 4,399 €
Frame: Prime Xtralite 6061 Full Butted Alloy, Forward Geometry, intenal removable battery, tapered head tube, Boost 12x148mm rear axle, integrated dropout speed sensor
Fork: RockShox Recon Silver RL 29, 120mm, Motion control, Solo Air, tapered steerer tube, Boost 15x110mm axle, 42mm offset. Settings: compression adjustment at low-speed to lock, rebound, air preload
Head composition: Onoff Saturn tapered for 1-1 / 8 ”to 1-1 / 2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
Gearbox : Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1: 1
Gear: Sram Trigger SX Eagle, 12s, X-Actuation 1: 1, single click
Brake levers: Sram Level T, Direct Link actuation, tooled reach adjust, lever pivot bushings
Cranks: Race Face Aeffect ebike, 165mm
Handlebars: Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore
Stem: Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm barbore
Seatpost : Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6mm, length 400mm
Saddle: FIZIK Terra Aidon X5 145mm
Front hub: Formula DC711, Boost 15x110mm, sealed bearings, IS 6 bolts
Rear hub: Formula EHL148 Boost 12x148mm, sealed bearings, IS 6 bolts
Chain: Sram SX Eagle, 12s, Powerlock
Cassette: Sram PG-1210, 11-50T, 12p
Tip: CN round stainless steel
Rims: MDK-HP1 29, 30mm internal width, tubeless ready, 32 spokes
Tires : Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead, Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
Grips: Onoff Diamond, 1lock-on, 135mm
Front brake: Sram Level T, 2 piece caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed organic pad
Rear brake: Sram Level T, 2 piece caliper, Centerline 180mm IS 6 bolts one-piece rotor, steel-backed organic pad
Converter: Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
Derailleur heel: Mondraker M068
Engine + battery: Bosch Performance Line CX Cruise (25Km / h) GEN4, Bosch Powertube 625Wh, Bosch Purion
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Model year | 2022 |
| Gears | 1x12 |
| Material | aluminium |
| Drive | Bosch Performance CX |
| Battery | 625 Wh |
| Brakes | Hydraulic disc brakes |
| product ID | 151789 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews