Mondraker Prime 29 e-bike, nimbus grey/bronze/vortex grey
Bike fitting discount 50 % (you will save 70 €)
Mondraker Prime 29 electric bike
Built for regular rides on unpaved and forest roads, with equipment with a good balance of durability, functionality and performance.
| Drive |
Bosch Performance Line CX Cruise (25 Km/h) GEN4 Smart System
|
| Battery |
BOSCH POWERTUBE 625 Wh
|
| Display |
Bosch Intuvia 100 / Bosch Mini Remote / Bosch System Controller
|
| Frame |
Prime Xtralite 6061 Full Butted Alloy, Forward Geometry, intenal removable battery, tapered head tube, Boost 12x148 mm rear axle, integrated dropout speed sensor
|
| Fork |
RockShox Recon Silver RL 29, 120 mm, Motion control, Solo Air, tapered steerer tube, Boost 15x110 mm axle, 32 mm steel stanchions, 42 mm offset. Settings: compression adjustment at low-speed to lock, rebound, air preload
|
| Shifting |
SRAM Trigger SX Eagle, 12s, X-Actuation 1:1, single click
|
| Derailleur |
SRAM SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
|
| Cassette |
SRAM PG-1210, 11-50T, 12s
|
| Chain |
SRAM SX Eagle, 12s, Powerlock
|
| Crankset |
Race Face Aeffect ebike, 165 mm, Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
|
| Brakes |
SRAM Level T, 2 piece caliper, Centerline 200 mm/180 mm IS 6 bolts one-piece rotor, steel-backed organic pad
|
| Brake levers |
Sram Level T, Direct Link actuation, tooled reach adjust, lever pivot bushings
|
| Rims |
Mavic E-CrossRide 29, 30 mm internal width, welded, PFP, tubeless ready, 28 spokes
|
| Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
| Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratched system, IS 6 bolts, HG freehub
|
| Spokes |
Mavic J-bend double butted, contactless lacing
|
| Front tire |
Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
|
| Rear tire |
Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
|
| Seat post |
Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6mm, length 400 mm
|
| Saddle |
MDK ebike black
|
| Stem |
Onoff Sulfur FG 30 mm 0°, 6061 forged alloy, 31.8 mm barbore
|
| Handlebars |
Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20 mm, width: 800 mm, 9° backsweep, 5° upsweep, 31.8 mm barbore
|
| Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45°x45°, bottom 51.9x40x8x45°x45°
|
| Sex | Men, Unisex |
| Model year | 2025 |
| Gears | 1x12 |
| Groupset | Other |
| Colour | nimbus grey/bronze/vortex grey |
| Material | aluminium |
| Wheel diameter | 29" |
| Drive | Bosch Performance CX |
| Battery | 625 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 120 mm |
| Dropper post | no |
| product ID | 254332 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews