Lapierre Overvolt HT 9.5, model 2020
Wheel size: 27.5 "
Frame: OVERVOLT INTEGRATED BOSCH SUPREME 5 ALLOY BOOST
Fork: RockShox JUDY SILVER Turnkey 15x110MM 27.5 '' 120MM TRAVEL
Derailleur: SHIMANO DEORE KRDM6000GS 10s
Cranks: Lapierre OVERVOLT BOSCH WIDE NARROW 16T 170mm
Cassette: SHIMANO HG500 10s 11-42T
Chain: SHIMANO HG54
Brakes: SHIMANO AMT200 Hydraulic
Gear: SHIMANO DEORE SLM6000 1x10
Head composition: FSA Orbit 1.5 ZS NO.57SC
Handlebars: Lapierre 6061DB W: 740mm W: 15mm Ø: 31.8mm
Grips: Lapierre DD34 Lock-on
Stem: Lapierre ALLOY Ø: 31.8mm L: 50mm
Seatpost: Lapierre ALLOY Ø: 31.6mm L: 350mm
Saddle: Lapierre by VELO
Front hub: SHIMANO MT400 THRU AXLE
Rear hub: SHIMANO MT400 THRU AXLE
Rims: Lapierre EAM + 32H 584-35c
Tires : S CHWALBE NOBBY NIC PERFORMANCE LINE ADDIX 27.5x2.6
Pedals: VP VPE-527
Wheels: SHIMANO SMRT10 180mm / 180mm
Engine: BOSCH PERFORMANCE CX (GEN2) 500Wh POWERTUBE PURION
Model year | 2020 |
Gears | 1x10 |
Groupset | Shimano Deore |
Material | aluminium |
Drive | Bosch Performance CX |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 88279 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews