Lapierre Overvolt HT 5.4 27.5 electric bike, white
Bike fitting discount 50 % (you will save 70 €)
Lapierre Overvolt HT 5.4 27.5 electric bike
| Motor |
Bosch Performance Line
|
| Battery |
Intube battery 400 Wh
|
| Frame |
Overvolt Bosch Supreme 5 alloy MIX
|
| Fork |
SR Suntour XCM 32 DS 15x100 mm, 100 mm travel
|
| Shifting |
Shimano Alivio SLM3100 9s
|
| Derailleur |
Shimano Alivio RD-M3100, 9-S Shadow
|
| Cassette |
Shimano HG200 11-36T 9s
|
| Chain |
KMC e9 Sport Silver -black 9s
|
| Cranks |
Lapierre Overvolt 170 mm, 34T narrow wide
|
| Brakes |
Tektro HD-M275
|
| Rims |
Schürmann Yak25 584x25 Disc Rim 32H with Silver Eyelets
|
| Hubs |
DA210, 15x100 mm, 32H 6 bolts / DA210, 4 sealed bearings, boost 12x148 mm, 32H 6 bolts
|
| Tires |
WTB Ranger Comp 29x2.3"
|
| Seat post |
XLC Alloy, Ø: 31.6 mm, L: 350 mm
|
| Saddle |
DDK
|
| Stem |
Alloy, 0°, Ø: 31.8 mm, L: 45 mm
|
| Handlebars |
XLC Alloy 6061 DB, Width: 720 mm, Rise: 15 mm, Ø: 31.8 mm
|
| Grips |
Velo Lock-on
|
| Pedals |
XLC by VP
|
| Model year | 2023 |
| Gears | 1x9 |
| Size | S |
| Material | aluminium |
| Wheel diameter | 27.5" |
| Drive | Bosch Performance CX |
| Battery | 400 Wh |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Control type | mechanical |
| product ID | 231366 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews