Kellys Tygon 30, model 2019
Bike fitting discount 20 % (you will save 28 €)
frame size M / L / XL
SHIMANO Steps E6100 engine
SHIMANO SW-E6100 switch unit for motor assis
SHIMANO SC-E 6100 cycling computer
battery KELLYS Re-Charge Li-ion internal 36V / 504Wh / capacity 14Ah
fork SR SUNTOUR XCM ATB HLO (29), 100mm, coil / Speed Lockout
main composition FSA 1.5 integrated
cranks SHIMANO FC-E6100 (38) - length 170mm
SHIMANO Deore SL-M6000 Rapidfire Plus / SW-E6010 switch for motor assist
SHIMANO Deore M6000 converter (direct mount)
number of transfers 10
cassette pinion SHIMANO CS-HG500-10 (11-42)
KMC e10T chain (108 articles)
brakes SHIMANO M315 Hydraulic Disc
SHIMANO brake discs front 180mm / rear 180mm
SHIMANO BL-M315 brake levers
hubs SHIMANO TX505 Disc (32 holes)
fixed axle SR SUNTOUR Maxle Lite - front 15x110mm / NOVATEC rear 12x148mm
KLS Cartel Disc 622x21 rims (32 holes)
string stainless steel black
tires SCHWALBE Rapid Rob Perfomance 57x622 (29x2.25) folding
stem KLS Active - diam 28.6mm / bar bore 31.8mm / 7 ° / length 70mm (S), 80mm (M), 90mm (L)
handlebars KLS Active RiseBar - diam 31.8mm / width 620mm (S), 640mm (M), 660mm (L)
KLS Crypton Lock-on handles
seatpost KLS Active - diam 30.9mm / length 350mm (S), 400mm (M - L)
KLS Avenger saddle
pedals KLS Master - alloy
LED E-bike front lighting
LED E-bike rear lighting
fenders SKS plastic
stand accessories
engine SHIMANO Steps E6100, 36V
weight kg 22.78 (M)
| Model year | 2019 |
| Gears | 1x10 |
| Groupset | Shimano Deore |
| Material | aluminium |
| Drive | Shimano STePS E6000 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 69356 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý deň, chcela by som sa opýtať, či sa dá baterka vybrať a nabiť mimo bicykel, v prípade, že bicykel bude ostávať v pivnici, kde nie je prístup k zástrčke a baterku by som brala so sebou na byt. Ďakujem.
Dobrý deň,
Batéria je plne integrovaná, je ju možné vybrať po demontáži pohonnej jednotky.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews