Kellys Tygon 10 29" electric bike, grey
Bike fitting discount 20 % (you will save 28 €)
Kellys Tygon 10 29" electric bike
| Motor |
PANASONIC GX Ultimate, 90 Nm, 36 V
|
| Battery |
KELLYS Re-Charge Li-ion internal 630 Wh / capacity 17.5 Ah
|
| Display |
PANASONIC center LCD
|
| Frame |
KELLYS e-FRAME, Uni-Body Integrated Design, Drive Core, tapered HT, internal routing, 12x148 mm Boost thru axle
|
| Fork |
SR SUNTOUR XCM32 (29) Boost, 120 mm, coil spring / 15 mm thru axle
|
| Shifting |
Shimano Altus SL-M2000 Rapidfire Plus
|
| Derailleur |
SHIMANO Altus M2000 (direct mount)
|
| Cassette |
SHIMANO CS-HG400-9 (11-36T)
|
| Chain |
KMC e9S (118 links)
|
| Cranks |
SAMOX (34) - length 170 mm
|
| Brakes |
SHIMANO BL-MT200/BR-MT200 Hydraulic Disc, 180 mm/180 mm
|
| Rims |
KLS Draft Disc 622x21 (32 holes)
|
| Hubs |
SHIMANO MT400-B Disc Center Lock (32 holes)
|
| Spokes |
stainless steel black
|
| Tires |
Michelin Country Race´r 29x2.10"
|
| Seat post |
KLS Active - diameter 30.9 mm / length 350 mm
|
| Saddle |
KLS Sentinel 2
|
| Stem |
KLS Alm/En 50 - diam 28.6 mm / bar bore 31.8 mm / length 60 mm
|
| Handlebars |
KLS Active RiseBar - diam 31.8 mm / rise 18 mm / width 720 mm
|
| Grips |
KLS Poison OneLockon
|
| Pedals |
plastic
|
| Headset |
FSA 1.5 semi-integrated
|
| Gear shift unit |
PANASONIC gear shifter button
|
| Thru axle |
front SR SUNTOUR 15x110 mm / rear NOVATEC 12x148 mm
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x9 |
| Groupset | Shimano Altus |
| Size | M, L, XL |
| Colour | gray |
| Material | aluminium |
| Wheel diameter | 29" |
| Drive | Panasonic GX Ultimate |
| Battery | 630 Wh |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 120 mm |
| Control type | electronic |
| product ID | 124609 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews