Ghost Ebike Kato X S8.7 +, model 2019
Bike fitting discount 50 % (you will save 70 €)
Wheel size: 27.5+ "
Frame: HYBRIDE KATO AL
Fork: RockShox Revelation RC Debon Air 120 mm
Derailleur: SRAM NX Eagle 12-S
Cranks: Miranda Delta 34T
Cassette: SRAM PG-1230 11-50
Brakes: TRP G-Spec Trail S 4/2 Piston 203 mm
Gear: SRAM GX Eagle Single Click
Head composition: 16012
Handlebars: GHOST MTB 780 mm Rise 35 mm Dia. 31.8 mm
Stem: GHOST MTB Dia. 31.8 mm
Seatpost: Satori Sorat Fury 31.6 mm
Saddle: WTB Code
Twisted wheels: Rodi Wheelset 30 mm 15x110 mm // Rodi Wheelset 35 mm 12x148 mm
Front stroke: 120 mm
Engine: Shimano DU-E8000
Heel: FRHG0021
Number of speeds: 12
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo 29x2.5
Rear tire: Maxxis Minion DHR II 3C MaxxTerra Exo 27.5x2.8
Battery: Shimano BT-E8010 504 Wh
Display: Shimano SC-E7000
KATO models can be supplied with MITAS tires. The manufacturer reserves the right to change and / or improve the design and components without prior notice.
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | Shimano Sora, SRAM GX, SRAM NX |
| Material | aluminium |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 63747 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews