Marin Alpine Trail E1 29/27.5 e-bike, red/black
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
MARIN Alpine Trail E1 29/27.5 electric bike
Alpine Trail E will take you further, faster and allow you to conquer the most aggressive trails, whether uphill or downhill.| Drive |
Shimano STEPS E7000
|
| Battery |
BT-8035, Internal 504Wh
|
| Charger |
Shimano Battery Charger EC-E6002
|
| Display |
SC-E7000 Display
|
| Frame |
All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
|
| Fork |
Rock Shock 35 Gold RL 29", Motion Control Damper, 160mm Travel, Maxle Stealth Axle, 44mm Offset
|
| Shock |
Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
|
| Rear derailleur |
Shimano Deore, Direct Attachment, 10-Speed
|
| Cassette |
Shimano Deore 10-speed 11-46T
|
| Chain |
KMC X-10E, Silver
|
| Crankset |
Marin Forged Alloy 165mm Length, Narrow Wide 38T Chainring
|
| Front brake |
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
|
| Rear brake |
Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor w/ Speed Sensor
|
| Brake levers |
Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
|
| Rims |
Front : Marin Aluminium Double Wall, 29" Diameter, 32 mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible;
Rear : Marin Aluminium Double Wall, 27.5" Diameter, 38 mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible |
| Front hub |
Shimano MT-410B, 110x15mm, centerlock Disc, 32H
|
| Rear hub |
Forged Alloy, E-Bike Specific Design, 148x12mm, Quad Sealed Bearings, Disc, 32H, Standard Freehub Body
|
| Spokes |
14g Black Stainless Steel
|
| Tires |
Front: Maxxis Assegai 29x2.5" , 3C MaxxTerra, Double Down, Tubeless Compatible
Rear: Maxxis Minion DHR II 27.5x2.8, 3C Maxx Terra, EXO+, Tubeless Compatible |
| Seat post |
TranzX YSP23J, 30.9mm, Travel S=125mm, M/L=150mm, XL=175mm
|
| Saddle |
Marin E-MTB Saddle
|
| Stem |
Marin 3D Forged Alloy, 35mm
|
| Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
|
| Grips |
Marin Single Clamp Locking
|
| Headset |
FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
|
| Pedals |
Marin MTB Plastic
|
| Shift levers |
Shimano Deore, I Spec EV, 10-Speed
|
| Controlling |
SW-E7000 Left Hand Switch for Assist Mode Change
|
| Accessories |
e13 Plus Chainguide, Aluminum Plate
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 1x10 |
| Groupset | Other |
| Size | S, M, L, XL |
| Colour | red/black |
| Material | aluminium |
| Wheel diameter | 29" front, 27.5" rear |
| Drive | Shimano STePS E7000 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 160 mm |
| Rear travel | 150 mm |
| Dropper post | yes |
| Shock type | Spring |
| Control type | mechanical |
| product ID | 144888 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews