WINORA Sinus AS Low 27.5 electric bike, traffic/night gray gloss
WINORA Sinus AS Low 27.5 electric bike
| Motor |
Pinion E1.9 MGU, 600 W, 85 Nm, 25 km/h
|
| Battery |
Tubepack 800 Wh
|
| Display |
Pinion Comfort FIT + Remote eShift FIT
|
| Frame |
Winora WP01AH7A460, through axle M12 (1.00)x148 mm, disc brake Post Mount
|
| Fork |
SR SUNTOUR Mobie 34 2CR, Travel: 80 mm
|
| Cranks |
Gates CDX Chainring, 39T, Gates Carbon Drive CDX
|
| Brakes |
Magura MT-C, 203mm/180mm
|
| Brake levers |
Magura BL-MT C
|
| Wheels |
DT Swiss HU 1900 Spline 27.5" 15x110 mm, Centerlock/HU 1900 Spine 27.5" 12x148 mm, 6 bolt Disc
|
| Tires |
Schwalbe AL Grounder Performance, DD RaceGuard, 60-584, reflex
|
| Seat post |
JD YSP28J, Dia. 34.9 mm, Travel: 100 mm
|
| Saddle |
Selle Royal Vivo
|
| Stem |
Satori TDS-673 Dia. 31.8 mm, L: 90 mm
|
| Handlebars |
JD JD TR28AL, Dia. 31.8 mm, 660 mm
|
| Grips |
Herrmans DD42, Lockable Grips
|
| Headset |
Cane Creek Viscoset ZN40 ZS56, Semi-Integrated
|
| Pedals |
VP Components VPE-541P w. Reflector
|
| Mudguards |
Curana Apollo Orbit 70 Aluminum extra matte black
|
| Front light |
Litemove AC-210U, 11-16V
|
| Rear light |
Supernova Supernova TL3 Z integrated in the fender
|
| Pinion |
9 Spline, 28T
|
| Belt |
Gates Carbon Drive Belt CDX, 120T
|
| Stand |
XLC Power Black Central Stand, adjustable
|
| Rear carrier |
Massload System luggage carrier, MIK HD
|
| Front carrier |
Easylife Front Carrier Aluminum (max. 3 kg)
|
| Sex | Men, Women, Unisex |
| Model year | 2026 |
| Gears | 1x9 |
| Groupset | Other |
| Colour | traffic/night grey gloss |
| Material | aluminium |
| Wheel diameter | 27.5" |
| Drive | Pinion |
| Battery | 800 Wh |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 80 mm |
| product ID | 405366 |
| Bike size | 43 | 49 | 55 |
|---|---|---|---|
| Height (cm) | < 165 cm | 165 - 180 cm | 180 - 195 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews