PRO Koryak 3Five 0° stem, Ø-35 mm, 35 mm
The 35mm diameter stem perfectly complements the new KORYAK 3FIVE MTB oversized handlebars.
Made of AL6061 aluminum alloy.
Available in lengths from 35 to 60 mm.
Robust construction for greater durability.
Length: 35 mm
Slope: 0°
Fork Neck: 1-1/8" (28.6mm)
Handlebar: 35 mm
Weight: from 150g
Fork neck: 28.6 mm (1-1/8")
Handlebar: 35 mm (1-3/8")
Length: 35 mm
Designation: MTB
| Colour | black |
| Handlebar diameter | 35 mm |
| product ID | 331226 |
Failure to follow these instructions may result in serious injury.
After a crash / impact, replace the product and all related parts.
When mounting on a 1" fork steerer, use the appropriate shim.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use extensions with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt as to whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor, or visit our website www.pro-bikegear.com.
IMPORTANT!
Carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, extensions, etc.).
Regularly check that the bolts are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 bolts: always tighten alternately crosswise.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (for adjustable stem only):
Adjust the angle.
Tighten to the torque value indicated on the stem.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews