Lapierre Pulsium 6.0 AXS bike, graphite grey gloss
Bike fitting discount 50 % (you will save 70 €)
Lapierre Pulsium 6.0 AXS bike
A road bike for experienced road riders who ride thousands of kilometers in a year. Suitable for regular or demanding training, amateur races and long trips. You can count on great equipment and light weight.
| Frame |
carbon, Non Boost 100/142 mm, disc brake Flat Mount
|
| Fork |
Lapierre Pulsium CF Fork, carbon steerer tube 1 1/8"-1 1/2" tapered, 12x100 mm thru-axle
|
| Shifting |
SRAM Rival eTap AXS
|
| Derailleur |
SRAM Rival ETAP AXS, 12-speed
|
| Front derailleur |
SRAM Rival ETAP AXS Brazed-On
|
| Cassette |
SRAM XG 1250 D1 12, 10-36T
|
| Chain |
SRAM Rival 12
|
| Brakes |
SRAM Rival, 160mm/140mm
|
| Brake levers |
SRAM Rival Shift-Brake-Lever
|
| Wheelset |
DT Swiss E1800 Spline 30 mm
|
| Tires |
Schwalbe One Perf, Raceguard, Microskin, TLE, 32-622
|
| Seat post |
Lapierre 27.2 mm, 350 mm, aluminum
|
| Saddle |
Prologue Akero
|
| Stem |
Lapierre Semi Integrated, A-head
|
| Bar tape |
Lapierre Vexgel tape
|
| Headset |
Acros IS52/IS52, ICR, Integrated
|
| Bottom bracket |
SRAM Dub PF 86.5 Road Wide, Pressfit 86
|
| Pedals |
VP Components 335 Clip&Strap
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 2x12 |
| Groupset | SRAM Rival |
| Colour | graphite grey glossy |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Wheel diameter | 700C (28") |
| Brakes | Hydraulic disc |
| Fork | Rigid |
| Control type | electronic |
| product ID | 360130 |
| Bike size | XS | S | M | L | XL |
|---|---|---|---|---|---|
| Height (cm) | < 160 cm | 160 - 170 cm | 170 - 178 cm | 178 - 185 cm | 185 - 195 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews