Rock Machine Blizzard TRL 70-29 bike, gloss black/metallic sand
Bike fitting discount 20 % (you will save 28 €)
Rock Machine Blizzard TRL 70-29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
| Frame |
Alloy Al-6061 T6 Custom tubing, BF1605, Floating Pivot Suspension, 130-140 mm travel, Trail Advanced Geometry, Shark Spine EVO 29er&27.5+, Boost 148x12, BB92 Press Fit, Inner Cable Routing, Adjust. seatpost ready
|
| Fork |
DVO Diamond D3, 150 mm, 44 mm offset
|
| Shock |
DVO Topaz T3, AIR
|
| Shifting |
Shimano Deore SL-M6100-IR RapidFire Plus, 12 speed
|
| Derailleur |
SHIMANO DEORE RD-M6100 Shadow Plus
|
| Cassette |
Shimano CS-M6100-12, 10-51T
|
| Chain |
Shimano DEORE CN-M6100
|
| Crankset |
Shimano FC-M6100, 32T
|
| Brakes |
Shimano M6120, Shimano SM-RT64, 180 mm/180 mm
|
| Rims |
WTB ST i29, 32H
|
| Hubs |
Shimano SLX HB-M7110-B, 32H, CENTER LOCK, 15x110 mm/12x148 mm Thru Type Axle
|
| Spokes |
Sapim Race, Stainless Black
|
| Tires |
WTB Trail Boss TCS Light/Fast Rolling, 29x2.40"
|
| Seat post |
ONE1 Alloy, MT171, dropper post 170 mm, 30.9 mm
|
| Saddle |
WTB Volt Comp
|
| Stem |
Race Face Aeffect R Alloy, 35 mm, 0°
|
| Handlebars |
Race Face Aeffect R 35, 20 mm rise, 780 mm, 35 mm
|
| Grips |
VELO, Lock-On
|
| Headset |
FSA Orbit 1.5 No.57E, Zero Stack, 1-1/8“x1.5“
|
| Bottom bracket |
SHIMANO BB-MT500PA PressFit, shell 41x92 mm
|
| Sex | Men, Unisex |
| Model year | 2023 |
| Gears | 1x12 |
| Groupset | Shimano SLX, Shimano Deore |
| Colour | gloss black/metallic sand |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 150 mm |
| Rear travel | 140 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | mechanical |
| product ID | 354184 |
| Bike size | M | L | XL |
|---|---|---|---|
| Height (cm) | 160 - 175 cm | 175 - 185 cm | 185 - 200 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews