Lapierre Zesty AM 3.0 29 ", model 2020
Wheel size: 29 "
Frame: Zest AM FIT SUPREME 6 140mm travel PRESSFIT, BOOST, METRIC, THRU AXLE
Fork: RockShox 35 GOLD RL BOOST 140mm
Derailleur: SRAM SX Eagle 12SPD
Cranks: SRAM SX Eagle 12SPD
Cassette: SRAM SX Eagle 12SPD
Chain: SRAM SX Eagle 12SPD
Brakes: SHIMANO MT401
Gear: SRAM SX Eagle 12SPD
Head composition: FSA ORBIT ZERO STACK + ANGLESET 0.5 °
handlebars: LP 6061DB 760m, 15MM RISE, 31.8 BAR BORE
Grips: Lapierrre Grips "FIT"
Stem: LP ALLOY 0 ° 35MM (S, M, L), 45MM (XL)
Seatpost : LP DROPPER by JD 80 (S), 100 (M), 130 (L, XL)
Saddle: Lapierre CrMo by Velo
Front hub: SHIMANO MT400, BOOST 15x110, centerlock, 32H
Rear hub: SHIMANO MT400, BOOST 12x148, centerlock, 32H
Rims: MACH 1 Trucks 30 622 * 30 (29 ")
Tires: HIGH ROLLER II 29 * 2.30 60 TPI EXO-TR / HIGH ROLLER II 29 * 2.30 60 TPI EXO-TR
Pedals: NW 91K steel cage
Wheels: SHIMA NO SM-RT30 180M
Muffler: Lapierre AF2 AIR TRUNNION METRIC REBOUND & LOCKOUT
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 88360 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews