Lapierre XR 5.9 29 bike, fir green
Bike fitting discount 50 % (you will save 70 €)
Lapierre XR 5.9 29 bike
A powerful full-suspension bike, with which you can easily handle regular off-road riding and day-long trips in the mountains. Equipment with a good ratio of performance and endurance.
| Frame |
XR full Carbon 100 mm travel 29'', pressfit, boost, metric, thru axle
|
| Fork |
FOX 32 Float SC P-S Grip remote 100 mm
|
| Shock |
FOX Float P-Se Remote up, 210x55 mm
|
| Derailleur |
Shimano Deore XT 12s Shadow +
|
| Cassette |
Shimano Deore 10-51T 12s
|
| Chain |
Shimano Deore 12s
|
| Crankset |
Shimano Deore MT512 32T 170 mm (S), 175 mm (M, L, XL)
|
| Brakes |
Shimano MT410 180/160 mm
|
| Wheelset |
Shimano MT400 hubs / Mavic XC 425 disc alloy rims / Shimano MT400 hubs / Mavic XC 425 disc alloy rims
|
| Front tire |
Maxxis REKON RACE EXO/TR 60-622 29x2.35
|
| Rear tire |
Maxxis REKON RACE EXO/TR 60-622 29x2.35
|
| Seat post |
Lapierre alloy, Ø: 31.6 mm, L: 400 mm
|
| Saddle |
Fizik Argo Vento X 140 mm
|
| Stem |
Lapierre AL6061 alloy, -6°, Ø: 31.8 mm, L: 60 mm (S,M), 70 mm (L,XL)
|
| Handlebars |
Lapierre alloy 6061 Top flat, Width: 740 mm, Ø: 31.8 mm
|
| Grips |
Lapierre grips anodized, S/M: small diameter, L/XL: large diameter
|
| Headset |
FSA Integrated IS-2 /42/ACB 1-1/8''-1.5''
|
| Bottom bracket |
Shimano MT800 Press Fit
|
| Pedals |
XLC by VP VPE-527
|
| Sex | Men, Unisex |
| Model year | 2025 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano Deore |
| Colour | Fir Green |
| Material | carbon fiber |
| Wheel material | Aluminium |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 100 mm |
| Rear travel | 100 mm |
| Dropper post | no |
| Shock type | Air |
| Control type | mechanical |
| product ID | 262993 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 179 cm | 180 - 189 cm | 190 - 200 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews