Kellys Soot X90 28 bike, emerald green
Kellys Soot X90 28 bike
Frame |
KELLYS Gravel Concept Carbon Disc / tapered HT, flat mount, internal routing / 12 mm thru axle
|
Fork |
KELLYS Carbon Disc, 1.5 tapered steerer / flat mount disc brake / internal routing / 12 mm thru axle
|
Shifting |
Shimano GRX ST-RX610-R Dual Control / BL-RX610-L
|
Derailleur |
Shimano GRX RX822 (direct mount)
|
Cassette |
Shimano Deore CS-M6100-12 (10-51T)
|
Chain |
Shimano CN-M7100 (114 items)
|
Cranks |
Shimano GRX RX610-1 (40T) - length 172.5 mm (S - M), 175 mm (L)
|
Brakes |
Shimano GRX RX400 Hydraulic Disc
|
Brake levers |
Shimano GRX ST-RX610-R Dual Control / BL-RX610-L
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
DT Swiss G 540 Disc 700Cx24 (28 holes)
|
Hubs |
KT Disc Center Lock (28 holes)
|
Tires |
Schwalbe G-One Allround 40-622 (700x38C) RaceGuard, ADDIX, folding
|
Seat post |
KLS Active Road - diameter 27.2 mm / length 400 mm
|
Saddle |
WTB Volt
|
Stem |
Promax - for internal cable routing, compatible with A-BOX head set / diam 28.6 mm / bar bore 31.8 mm / 6° / length 80 mm (S ), 90 mm (M), 100 mm (L)
|
Handlebars |
GravelBar - double butted / diam 31.8 mm / width 400 mm (S), 420 mm (M), 440 mm (L)
|
Bar tape |
KLS bar tape
|
Headset |
Token A-BOX Aero integrated cable routing system
|
Bottom bracket |
Shimano Press-Fit BB-RS500-PB
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore, Shimano GRX |
Colour | emerald green |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 700C (28") |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 330450 |
Bike size | S | M | L |
---|---|---|---|
Height of the figure (cm) | < 170 cm | 170 - 178 cm | 178 - 185 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews