Kellys SOOT 20 28 bike, gray
Kellys SOOT 20 28 bike
Basic model for a casual user who is looking for an alternative means of transport to get from place A to place B at an affordable price.
| Frame |
KELLYS Gravel Concept - Aluminium alloy Disc, flat mount, tapered HT, internal routing, 12x142 mm thru axle
|
| Fork |
KELLYS Carbon Disc - 1.5 tapered steerer, flat mount disc brake, 12x100 mm thru axle
|
| Shifting |
Shimano Claris SL-R2000 Rapidfire Plus (for FlatBar)
|
| Front derailleur |
Shimano Claris R2000 (braze on)
|
| Cassette |
Shimano CS-HG50-8 (11-32T)
|
| Chain |
KMC Z8 (112 links)
|
| Crankset |
Shimano Claris R2000 (50x34T) - length 170 mm (S - M), 175 mm (L)
|
| Brakes |
TEKTRO Spyre Mechanical Disc, 160 mm/160 mm
|
| Brake levers |
Shimano Claris BL-R2000 (for FlatBar)
|
| Rims |
KELLYS Grind Disc 622x17 (32 holes / riveted)
|
| Hubs |
NOVATEC Disc (32 holes)
|
| Tires |
Schwalbe Smart Sam Performance 700x40C ADDIX
|
| Seat post |
KLS Active Road - diam 30.9 mm / length 350 mm (S), 400 mm (M - L)
|
| Saddle |
KLS SlipStream cr-mo rails
|
| Stem |
KLS Active Road - diam 28.6 mm / bar bore 31.8 mm / 6° / length 90 mm (S), 100 mm (M), 110 mm (L)
|
| Handlebars |
KLS Advanced FlatBar - diam 31.8mm / width 720mm
|
| Grips |
KLS Advancer
|
| Headset |
FSA 1.5 semi-integrated
|
| Bottom bracket |
Shimano BB-RS500
|
| Derailleur |
Shimano Claris R2000 (direct mount)
|
| Thru axle |
front Mr.control 12x100 mm / rear NOVATEC 12x142 mm
|
| Intwined |
stainless steel black
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 2x8 |
| Groupset | Shimano Claris |
| Size | S, M, L |
| Weight | 11.08 kg (M) |
| Colour | gray |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 28" |
| Brakes | Mechanical disc brakes |
| Fork | Rigid |
| Control type | mechanical |
| product ID | 177372 |
| Bike size | S | M | L |
|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 180 cm | 180 - 195 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews