CTM TRANZ 2.0 Treking 28 bike, matte black
CTM TRANZ 2.0 Trekking 28 bike
Suitable not only for commuting to work, but also for weekend trips outside the city. Ride on cycle paths, paved and unpaved roads and during weekend activities. If you ride more frequently, expect to do basic servicing regularly.
| Frame |
ALU 6061, M, L, XL
|
| Fork |
SUNTOUR NEX HLO DS, 63 mm travel, 700C
|
| Shifting |
Shimano SLM2010, 9 speed
|
| Derailleur |
Shimano RD-M2000
|
| Front derailleur |
Shimano FD-M2020
|
| Cassette |
Shimano CS-HG200, 9 speed, 11-34T
|
| Chain |
KMC X9
|
| Crankset |
SHIMANO FC-MT101, 36-22T
|
| Brakes |
Shimano MT200 hydraulic
|
| Rims |
CTM 622x21, 32H, black
|
| Rear hub |
NOVATEC 32H DISC 6H, black
|
| Tires |
28 x 1.75"
|
| Seat post |
CTM aluminum Ø31.6 x 350 mm
|
| Saddle |
CTM
|
| Stem |
CTM alloy adj., 90 mm, 25.4 mm
|
| Handlebars |
CTM alloy, 680 mm, 40 mm rise
|
| Headset |
1 1/8" DIA: 28.6/44/30 mm
|
| Pedals |
Flat HF-896 DU bearing
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 2x9 |
| Groupset | Other |
| Size | M, L, XL |
| Colour | matte black |
| Material | aluminium |
| Wheel diameter | 28 mm |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 63 mm |
| product ID | 394546 |
| Bike size | M (17") | L (19") | XL (21") |
|---|---|---|---|
| Height (cm) | < 175 cm | 175 - 185 cm | > 185 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews