Giant Revolt E+ Pro XR 28 e-bike, rosewood
Choose in-person pick-up at the store and decide on the spot.
Bike fitting discount 50 % (you will save 70 €)
Giant Revolt E+ Pro XR 28 e-bike
An electric bike that offers maximum professional performance. Equipped with the best that the component manufacturer has to offer, made of lightweight materials for the lowest possible weight.
| Motor |
SyncDrive Pro powered by Shimano EP8, 85 Nm
|
| Battery |
EnergyPak Smart Compact 500 Wh, compatible with EnergyPak Plus
|
| Charger |
Giant EnergyPak 6A Smart Charger
|
| Frame |
ALUXX Aluminum
|
| Fork |
Advanced Composite, 12 mm fixed axle
|
| Shifting |
Shimano GRX Di2 (ST-RX815-R/L), electronic shifting, 1x11 gears
|
| Derailleur |
Shimano GRX Di2 (RD-RX817)
|
| Cassette |
Shimano CS-M5100-11, 11-42 teeth
|
| Chain |
KMC e.11 Turbo, EcoProteq
|
| Cranks |
Shimano FC-EM600, Shimano SM-CRE80-R chainring, 47 teeth
|
| Brakes |
Shimano BR-RX810, hydraulic, discs 180 mm
|
| Brake levers |
Shimano ST-RX815 hydraulic
|
| Rims |
Giant eX 2 700c
|
| Hubs |
Giant Performance Tracker Road, sealed bearings, 12 mm thru axle
|
| Spokes |
front: Sapim Race, rear: Sapim E-Lite
|
| Tires |
Maxxis Receptor EXO Skinwall, 700x40c (622x40), tubeless
|
| Seat post |
Giant D-Fuse SL, carbon
|
| Saddle |
Giant Approach
|
| Stem |
Giant Contact
|
| Handlebars |
Giant Contact XR D-Fuse, 31.8 mm, 5° back sweep, flared drop
|
| Bar tape |
Giant Connect bar tape
|
| Control unit |
RideControl GO, Shimano Di2
|
| Accessories |
tubeless kit
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x11 |
| Groupset | Shimano GRX |
| Colour | rosewood |
| Material | aluminium |
| Wheel diameter | 28" |
| Drive | Shimano STePS EP8 |
| Battery | 500 Wh |
| Brakes | Hydraulic disc |
| Fork | Rigid |
| Control type | electronic |
| product ID | 231449 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews