Shimano HB-QC300 front hub, CenterLock, 36 holes, quick link
Durable front hub engineered for easy setup and long-lasting performance. Easy installation of the disc brake rotor on the Center Lock. Hub width: OLD - 100mm.
Type: MTB, Total package weight: 404g, 36 holes, Front, Black, Axle 10mm, Mounting method: Quick release, Center Lock, Material: Aluminum/Steel
| Colour | black |
| Location | Front |
| Axle type | quick release |
| Nut | none |
| Brake disc installation | Center Lock (CL) |
| product ID | 248125 |
WARNING
For assistance with installation, adjustment and replacement of products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and keep it in a safe place for later reference.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surrounding area. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could cause personal injury, or physical damage to equipment or the surrounding area.
WARNING
- This wheel is equipped with a quick release hub for easy installation and removal. Failure to properly install this quick release hub (wheel) to the bicycle can cause the wheel to come off of the bicycle during riding resulting in serious personal injury.
- Use a front fork equipped with a wheel retention mechanism.
- BE SURE TO THOROUGHLY READ THE INSTRUCTIONS FOR THE QUICK RELEASE HUB IN THE SERVICE INSTRUCTIONS BEFORE USE. If there are any questions, ask your dealer. INCORRECT INSTALLATION OF THE HUB MAY RESULT IN SERIOUS INJURY.
- Before riding the bicycle, check that the wheels are securely fastened. If the quick release lever is not used properly, the wheel may come off and so on, and a serious accident could result due to falling.
- If the quick release mechanism is not used correctly, the wheel may come off the bicycle and a serious injury could result. Read the service instructions for the quick release mechanism carefully before use.
- If the quick release lever is on the same side as the disc brake rotor, there is a danger of it interfering with the disc brake rotor. Check that even after tightening the quick release lever with the palm of your hand with all your strength, the quick release lever does not interfere with the disc brake rotor. If the lever interferes with the disc brake rotor, stop using the wheel and consult with your dealer or representative.
CAUTION
Only tighten and loosen the quick release lever by hand. Never use any tools such as hammers to tighten the quick release lever, as this may cause damage.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews