Shimano Nexus DH-C6000-2R front hub with dynamo, 6 V/2.4 W, 36 holes, 140 mm
Dynamo hub DH-C6000. Dynamo hub designed for use on trekking and city bikes. The hub generates a voltage of 6V, a power of 2.4W, and 36 holes for spokes.
| Colour | silver |
| Location | Front |
| Axle type | other |
| Nut | none |
| Brake disc installation | 6 screws (IS 6) |
| product ID | 282082 |
WARNING
For installation, adjustment and replacement information not found in the user's manual, consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to carefully read this "user's manual" before use, follow it for correct use, and save it so that you can refer to it at any time.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING
- This wheel is equipped with a quick release hub for easy installation and removal. Failure to properly install this quick release hub (wheel) to the bicycle can cause the wheel to detach from the bicycle while riding, resulting in serious personal injury.
- Use a front fork equipped with a wheel retention mechanism.
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. The wheel may fall off, etc., which may lead to a fall and serious injury.
- Observe the total weight of the bicycle (bicycle + rider + luggage) indicated on the main part of the hub. If the total weight of the bicycle is indicated on the main part of the hub, a power modulator is built in to regulate excessive braking effect. If the total weight of the bicycle exceeds the recommended values, braking may be insufficient; if it is lower, braking may be too effective and the wheel may lock, causing you to fall off the bicycle. Before use, make sure you fully understand the performance of the power modulator. The power modulator is not a device to prevent wheel lock-up.
- Before riding the bicycle, make sure that the front and rear lights can be switched on.
CAUTION
Never touch the connecting terminals of the hub dynamo while riding or turning the wheels. Failure to do so may result in electric shock.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
