Shimano XT HB-M8010 front hub, Center Lock, 32 bolts, 15x110 mm
Shimano XT HB-M8010 front hub
|
Designed for 15 x 110 mm E-THRU thru axles to increase wheel stiffness
|
|
Hub comes without Center Lock SM-HB20 nut
|
|
Refined hub sealing for long life
|
|
Classic hub design with cones for easy setup and service
|
|
Polished ball tracks on cones and hubs for smooth operation and low rolling resistance
|
| Colour | black |
| Location | Front |
| Number of holes | 32 |
| Axle type | fixed "boost" |
| Nut | none |
| Brake disc installation | Center Lock (CL) |
| Axis | solid, Ø - 15 mm E-Thru |
| Weight | 158 g |
| Disc mount | Center Lock (without nut SM-HB20) |
| Material | aluminium |
| product ID | 97346 |
WARNING
For installation, adjustment and replacement information that is not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and the surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. If the quick release lever is not used properly, the wheel may come off and so on, and a serious accident could result from a fall or collision.
- Before riding the bicycle, you should thoroughly check the hubs and make sure that there are no cracks in the axles; if any unusual conditions are found, do NOT use the bicycle. This front hub is designed for downhill riding and freeriding. However, depending on the riding conditions, cracks may form in the hub axle, which may result in axle failure. This could lead to an accident which could result in serious injury or even death.
- This hub can only be used in combination with a dedicated front fork and E-THRU. If it is used in combination with any other front fork or hub axle, the wheel may become detached from the bicycle during riding, and serious injury may result.
- Always follow the instructions in the front suspension fork's instruction manual when installing the front wheel to the front suspension fork. The securing method as well as the tightening torque of the front wheel differ depending on the type of front suspension fork used. If the instructions are not followed, the front wheel may come off, and serious injury may result.
- Check that the quick release lever does not interfere with the disc brake rotor even when it is fully engaged. If the quick release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the quick release lever interferes with the disc brake rotor, stop using it immediately and consult the place of purchase or a distributor.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
