Shimano HB-QB400 front hub, 6-hole, 32-hole, quick link
HB-QB400 front hub. MTB hub, 36 holes, intended for use with a disc for 6 holes. Sealed bearings with dimensions 10x26x8mm. OLD: 100mm. Lightweight aluminum alloy quick release (lever).
Type: MTB, Total package weight: 440g, 36 holes, Front, black, Fastening method: Quick release, 6-hole, Material: Aluminum
| Colour | black |
| Location | Front |
| Axle type | quick release |
| Nut | none |
| Brake disc installation | 6 screws (IS 6) |
| product ID | 297260 |
WARNING
For assistance with installation, adjustment, and replacement of products not found in the user's manual, please consult the place of purchase or a distributor. A dealer's manual intended for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, physical damage to equipment and the surrounding area. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.
WARNING
- This wheel is equipped with a quick release hub for easy installation and removal. Failure to properly install this quick release hub (wheel) on the bicycle can cause the wheel to detach from the bicycle during riding, resulting in serious personal injury.
- Use a front fork equipped with a wheel retention mechanism.
- BE SURE TO CAREFULLY READ THE INSTRUCTIONS FOR THE QUICK RELEASE HUB IN THE INSTRUCTION MANUAL BEFORE USE. If you have any questions, ask your dealer. IMPROPER INSTALLATION OF THE HUB CAN RESULT IN SERIOUS PERSONAL INJURY.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever can cause the wheel to fall off, etc., and can lead to serious injury due to a fall.
- If the quick release mechanism is not used correctly, the wheel may fall off the bicycle, resulting in serious injury. Before use, carefully read the instruction manual for the quick release mechanism.
- If the quick release lever is on the same side as the disc brake rotor, there is a risk that it may interfere with the disc brake rotor. Check that even after tightening the quick release lever with your palm with full force, the quick release lever does not interfere with the disc brake rotor. If the lever interferes with the disc brake rotor, stop using the wheel and consult your dealer or representative.
CAUTION
Only tighten and loosen the quick release lever by hand. Never use any tools such as a hammer to tighten the quick release lever, as this may cause damage.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews