Tern HSD S8i 20 electric bike, light blue
Tern HSD S8i 20 electric bike
The Tern HSD range of electric bikes is a representative of the rapidly developing category of e-bikes, which offers people excellent controllability, a frame with a low entry and also comfort comparable to classic size bikes. You will easily weave through the streets of cities with them, and it is easier to park them in a garage or transport them by car. Especially if you insert the telescopic seat post and fold the steering column with the handlebars. In addition, these two elements also guarantee that you can smoothly adjust the bike for riders from 150 to 195 cm.Fits one Thule® Yepp Maxi, Yepp Nexxt Maxi or Bobike® GO Maxi child seat - no adapters required.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
20” wheels
Wheel size used mainly on children's bikes and balance bikes. The size usually correspond to the frame size of the particular bike.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
| Drive |
Bosch Active Line Plus (Gen 3), max speed 25 km/h
|
| Battery |
Bosch PowerPack 400
|
| Charger |
Bosch Standard Charger
|
| Display |
Bosch Purion, 4 mode selectable, walk assist
|
| Frame |
Tern HSD, 6061-AL, patented design, Tern sliding dropouts, EFBE Tri-Test approved: 170 kg
|
| Fork |
Suntour custom for Tern, 1.5" tapered Chromoly steerer, 32 mm stanchions, Thru-axle, 70 mm travel, EFBE tested for 170 kg
|
| Shifting |
Shimano Nexus 8
|
| Cassette |
Gates CDX, precision CNC machined cog
|
| Chain |
Gates Carbon Drive CDX belt
|
| Cranks |
Tern HSD custom, Gates CDX CNC machined beltring
|
| Brakes |
Magura MT4, hydraulic disc, 180 mm / 160 mm rotor
|
| Wheels |
Tern Atlas H, cargo wheel
|
| Rims |
Tern Atlas H, wide 35 mm
|
| Front hub |
Novatec, Thru-axle, sealed bearings
|
| Rear hub |
Shimano Nexus 8
|
| Tires |
Schwalbe Big Ben, 55-406, RaceGuard puncture protection, ECE-R75 ebike certification
|
| Seat post |
Tern Telescope, 34.9/30.9 mm, 2014-AL
|
| Saddle |
Tern HSD
|
| Stem |
Tern Andros (G2), adjustable, forged construction, patented technology
|
| Handlebars |
Tern Sweep, 6061-AL, Tern Andros adapted
|
| Grips |
Ergon
|
| Headset |
Tern Flux Pro Taper, 1.5", angular contact bearings, Physis integrated
|
| Pedals |
Urban with non-slip surface
|
| Steering column |
Tern Physis 3D (G2), 3D forged, 5 patented technologies, 12°, 290 mm
|
| Range |
42 - 110 km
|
| Pannier rack |
Atlas H Rack™, Atlas Rack Mount, 6 point mounting; 60 kg load capacity
|
| Front light |
Tern Valo Direct, 45 lux/190 lumens
|
| Rear light |
Herrmans H-Trace, for eBike
|
| Accessories |
frame lock with Abus® key, bell, chain guard, SKS fenders
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 1x8 |
| Groupset | Other |
| Weight | 25.4 kg |
| Colour | blue |
| Material | aluminium |
| Wheel diameter | 20" |
| Drive | Bosch Active Line |
| Battery | 500 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Rider weight limit | 120 kg |
| Total weight limit | 170 kg |
| Rider height | 150-195 cm |
| product ID | 167901 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
-7% POC Omne Beacon MIPS helmet, fluorescent orange AVIP/uranium black matt
from 229 €
-7%
RRP 288 €
Sale -19% Lezyne E-BIKE SUPER HB STVZO E1000 e-bike front light
116 €
-19%
RRP 180 €
savings Lezyne Matrix Saddle Tagger mount for Apple AirTag, black
17.49 €
savings
RRP 26.99 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews