Rock Machine Cityride e300B 28 electric bike, brown
Rock Machine Cityride e300B 28 electric bike
Drive |
BOSCH ACTIVE LINE PLUS, 36V, 250W, 50Nm
|
Display |
Bosch Purion Anthracite
|
Frame |
Alloy Al-6061 T6 Custom Low Step Thru tubing, Smooth Welding, City Ride Geometry, 700C specific, BOSCH MID Motor, OLD 135x9, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
SR Suntour NEX DS, 1-1/8", Coil, QR Type, 50 mm travel
|
Derailleur |
Shimano Altus RD-M2000-L
|
Cassette |
Shimano CS-HG200-9, 11-34T
|
Chain |
KMC X9-ept
|
Cranks |
SAMOX EC33-BH3-F9, 38T
|
Brakes |
Shimano BL-MT200/BR-MT200, 160 mm / 160 mm rotor, hydraulic disc brake
|
Rims |
Stars J19ZK, 36H
|
Hubs |
SHIMANO HB-TX505, 36H, CENTER LOCK, QR Type
|
Spokes |
Sapim Leader, Stainless Black
|
Tires |
CST Reach KevlarGuard, 700x40C
|
Seat post |
Alloy, SP C207
|
Saddle |
SR Sphere 5064DRC
|
Stem |
ONE1 MTS-C269-5 FOV ext. 90/110, BB 31.8 mm
|
Handlebars |
ONE1 Alloy, HL NR-AL-124 BT FOV, width 620 mm x Ø 31.8 mm
|
Grips |
HERRMANS LINE DD36BR, HERRMANS LINE DD36BL
|
Headset |
FSA TH-805ST Semi-Cartridge, 1-1/8"
|
Pedals |
Marwi SP-823
|
Shift levers |
SHIMANO ALTUS SL-M2010-9R RapidFire Plus, 9-speed
|
E-bike system |
BOSCH GEN3 ACTIVE LINE PLUS - Middle Drive Unit
|
Battery capacity |
BOSCH Powerpack Rack 500Wh BBR275
|
Charging time |
BOSCH Compact charger 2A, 7.5 h
|
Number of charging cycles |
1000/60% of original capacity
|
Range |
100 km (ECO mode)
|
Front light |
AXA Compactline 20
|
Rear light |
AXA Blueline
|
Model year | 2021 |
Gears | 1x9 |
Weight | 25.15 kg (L) |
Material | aluminium |
Wheel diameter | 28" |
Drive | Bosch Active Line |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 50 mm |
Weight limit | 145 kg |
product ID | 115314 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews