Lapierre e-Shaper 3.2 29 electric bike, gray
Lapierre e-Shaper 3.2 29 electric bike
Are you looking for a light trekking electric bike for trips on paved roads? This is the Lapierre e-Shaper 3.2 model with an Ebike Motion drive and a 250 Wh battery.For lovers of urban cycling and cyclotourism who don't hesitate to pack their bike bags and go on an adventure. The reliable and durable equipment is adapted for long hours in the saddle on various roads. Various extra accessories can be found in the equipment.
Drive |
EBIKE MOTION
|
Frame |
New e-Shaper Supreme 5 alloy with integrated routing + Kickstand & Fenders Ready
|
Fork |
e-Shaper carbon / alloy steerer
|
Shifting |
Shimano Deore SL-M5100, 11-speed
|
Derailleur |
Shimano Deore RD-M5100, 11-speed, Shadow +
|
Cassette |
Shimano Deore CS-M5100, 11-51T, 11-speed
|
Chain |
KMC X11, 11-speed
|
Cranks |
Samox TAM37 with 40T Narrow Wide chainring, 170 mm (S/M/L), 175 mm (XL)
|
Brakes |
Tektro HD-R280 Flat mount, 3 fingers
|
Rims |
WTB i23 32H, 622x23, Tubeless Ready
|
Hubs |
Lapierre DA212, 12x100, 32H 6 bolts / EBM X35+ DRIVE UNIT, 32H 6 bolts
|
Tires |
WTB Byway 700x44, Tan Sidewall, Dual DNA, 60TPI, TR (29")
|
Seat post |
Lapierre Antishock Ø 27.2 mm, 360 mm, offset 20 mm
|
Saddle |
Selle Royal Vivo Ergo Reflective
|
Stem |
Lapierre alloy, internal routing, Ø 31.8 mm, 80 mm (S), 90 mm (M), 100 mm (L)
|
Handlebars |
Lapierre alloy flatbar, 620 mm, Ø 31.8 mm
|
Grips |
XLC Rounded grips
|
Pedals |
VP VPE-461
|
Accessories |
fenders, rack, carrier, light
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x11 |
Groupset | Shimano Deore |
Colour | grey |
Material | aluminium |
Wheel diameter | 29" |
Drive | Ebikemotion |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 150866 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews