Mondraker F-Play 24 children's electric bike, orange/black
Mondraker F-Play 24 children's electric bike
Drive |
Mahle-Ebikemotion X-35
|
Battery |
Mahle-Ebikemotion Internal 250 Wh
|
Frame |
F-Play 24 6061 Alloy Stealth evo, hydroformed tubing, Zero Suspension System, 120 mm travel, one piece bolt-on upper link, integrated internal non-removable battery, Tapered head tube, HHG internal cable routing, BSA bottom bracket, QR 9 mm rear axle, 1x drivetrain compatible
|
Fork |
X-Fusion Velvet RL 26, 100 mm, air spring, tapered steerer tube, 9x100 mm axle, 32 mm aluminum stanchions, 41 mm offset. Settings: lockout, rebound, air preload
|
Shock |
X-Fusion 02PRO R, 210x47.5mm.
Settings: low-speed rebound, air preload. 45x8mm top and bottom bushings |
Shifting |
Sram trigger GX 10s, X-actuation 1:1
|
Derailleur |
Sram GX, 10s, short cage, X-actuation 1:1
|
Cassette |
Sram PG 1020 11-36T, 10s
|
Chain |
Sram PC1031 10s, Powerlock
|
Cranks |
Samox DM 30T steel, 152 mm
|
Brake levers |
Sram Level, tooled reach adjust, lever pivot bushings
|
Rims |
MDK-XP1 24 TLR, 25 mm internal width, tubeless ready, 32 spokes
|
Front hub |
Formula DC20LW, 9x100 mm, cup cone ball bearings, IS 6 bolts
|
Rear hub/Engine |
Mahle-Ebikemotion X-35
|
Spokes |
CN round stainless steel
|
Tires |
Kenda Booster 24x2.4 single compound 30TPI, wire bead
|
Seat post |
MDK XC 0-R, 6061 T6 Alloy, diameter 31.6 mm, length 300 mm
|
Saddle |
SDG Fly JR
|
Stem |
Onoff Sulfur FG 30 mm 0º, 6061 forged alloy, 31.8 mm barbore
|
Handlebars |
MDK XC 1.0, 6061 alloy, rise: 25 mm, width: 680 mm, 9º backsweep, 5º upsweep, 31.8 mm barbore
|
Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
Bottom bracket |
BSA, 73 mm
|
Sex | Kids |
Model year | 2023 |
Gears | 1x10 |
Groupset | SRAM GX |
Colour | orange/black |
Material | aluminium |
Wheel diameter | 24" |
Drive | Mahle X35 |
Battery | 250 Wh |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
Rear travel | 120 mm |
product ID | 226273 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews