Cannondale Moterra Neo Carbon 2 29 electric bike, mantis
Cannondale Moterra Neo Carbon 2 29 electric bike
Get more out of every ride - more time on the bike, more climbs, more descents than ever before. Thanks to the tuned suspension , excellent stiffness and incredibly low center of gravity, Moterra brings you a new level of dexterity and agility in the field of e-bikes.Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Drive |
Bosch Performance Line CX
|
Frame |
Moterra Neo Carbon Front Triangle, SmartForm C1 Alloy Swingarm, 150 mm travel, Proportional Response Tuned Suspension, removable downtube battery, alloy skid plate, 55 mm chainline, internal cable routing, 148x12 mm thru-ax. – 1.8” tapered headtube, 18 mm two-bolt kickstand mount
|
Fork |
RockShox Lyrik Select, 150 mm, DebonAir, 15x110 mm thru-axle, tapered steered, 44 mm offset
|
Rear shock |
RockShox Deluxe Select+, DebonAir, 2-Pos adjustment mode, adjustable rebound
|
Engine |
Bosch Performance Line CX
|
Battery type |
Bosch Powertube 750 Wh
|
Charger |
Bosch 4A
|
Display |
Bosch Kiox
|
Rear derailleur |
Shimano XT RD-M8000
|
Cranks |
FSA Bosch E-bike w/ 55 mm chainline, 160 mm, 34T
|
Cassette |
Shimano SLX, 10-51T, 12-speed
|
Chain |
Shimano SLX, 12-speed
|
Shifters |
Shimano SLX 12-speed
|
Brakes |
Shimano MT520 4-piston hydraulic disc
|
Brake levers |
Shimano MT501 hydraulic disc
|
Rotors |
Shimano RT64 203/203 mm
|
Rims |
WTB ST i30 TCS, 32h, Tubeless ready
|
Hubs |
front Formula 15x110 mm thru-axle,
rear Shimano MT410, 12x148 mm thru-axle |
Spokes |
DT Swiss Champion
|
Headset |
Acros integrated sealed bearing
|
Handlebars |
Cannondale 3 Riser, 6061 Alloy, 25 mm rise, 8 ° sweep, 5 ° rise, 800 mm
|
Stem |
Cannondale 2, 6061 Alloy, 35mm, 0°
|
Grips |
Fabric Funguy
|
Saddle |
Fabric Scoop Shallow Sport, Steel Rails
|
Seatpost |
Cannondale DownLow Dropper, internal routing, 31.6, 125 mm (S), 150 mm (M), 170 mm (L, XL)
|
Tires |
Front Maxxis Minion DHF, 29 x 2.6", EXO, Tubeless ready, rear Maxxis Rekon, 29 x 2.6" (27.5x2.6" - size Small), EXO, Tubeless ready
|
Product details
Sex | Men, Unisex |
Battery | 756 Wh |
Drive | Bosch Performance CX |
Model year | 2023 |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" (for size S, rear 27.5") |
Fork travel | 150 mm |
Material | carbon fiber, aluminium |
Colour | praying mantis |
Fork | Air |
Shock | Air |
Rear travel | 150 mm |
product ID | 213055 |
Mountain, urban, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Universal | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
star_outlinestar_outlinestar_outlinestar_outlinestar_outlineYou may find these products complementary
Pedals / Clipless MTB
More productsShow all products from this categoryAM/EM helmets
More productsShow all products from this categoryBike apparel and Backpacks
More productsShow all products from this categoryWhy shop with us?
Find out what makes us specialWhy shop with us?
More about shopping800 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There aren't currently any reviews. If you have experience, add your review here.