GHOST E-Teru Universal Low EQ 27.5 e-bike, metallic dirty blue/blue grey gloss
GHOST E-Teru Universal Low EQ 27.5 electric bike
The fine-tuned combination of refined design, powerful Yamaha PW-ST engine, 63 mm lift and 27.5-inch wheels will ensure you conquer any terrain without any problems. When driving, you will definitely appreciate the mudguards, rear carrier and high-quality lighting.While driving, you can change the assistance modes depending on how much assistance you need. All driving data such as distance, speed, battery charge status or degree of assistance are shown on the easy-to-read display.
Drive |
Yamaha PW-ST 70 Nm
|
Battery |
Simplo 630 Wh
|
Frame |
E-TERU AL Low
|
Fork |
SR Suntour NEX HLO E25 DS 63 mm
|
Derailleur |
Shimano Deore RD-M4120, 10-speed
|
Cassette |
Shimano Deore CS-M4100, 11-42T
|
Chain |
KMC e10s
|
Cranks |
Miranda 38T
|
Brakes |
Tektro HD-T275 160 mm Disc / Tektro 160 mm
|
Brake levers |
Tektro HD-T275
|
Rims |
Schürmann Yak Disc 25
|
Hubs |
Shimano HB-TX505 QR 100 mm / Shimano FH-TX505 QR 135 mm
|
Tires |
Continental Contact Cruiser 2.4
|
Seat post |
Satori Harmony SA 31.6 mm
|
Saddle |
Selle Royal Essenza
|
Stem |
XLC 31.8
|
Handlebars |
GHOST, Ø 31.8 mm, 720 mm/25
|
Grips |
XLC Ergo
|
Pedals |
VPE-461
|
Accessories |
SKS fenders, Ursus Mooi 18 stand, carrier
|
Front light |
Herrmans H-Black MR4 E
|
Rear light |
Axa Juno E-Bike
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x10 |
Groupset | Shimano Deore |
Colour | metallic dirty blue/blue gray gloss |
Material | aluminium |
Wheel diameter | 27.5" |
Drive | Yamaha |
Battery | 630 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 63 mm |
product ID | 141442 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews