Yeti 160E T3 SRAM XO 29" e-bike, blue
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 100 % (you will save 180 €) Free
Yeti 160E T3 SRAM XO 29" e-bike
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
| Drive |
Shimano EP801 motor
|
| Battery |
Shimano 630 Wh internal battery
|
| Charger |
Shimano E6002 charger
|
| Display |
Shimano EM800 display
|
| Frame |
TURQ Series carbon fiber frame with Sixfinity suspension technology, internally tunneled cable routing, 148 × 12 mm BOOST dropouts, sealed enduro max pivot bearings, Universal Derailleur Hanger (UDH) and axle
|
| Fork |
FOX FACTORY 38 GRIP2, 170 mm travel
|
| Shock |
FOX FACTORY FLOAT X2 rear shock
|
| Shifting |
SRAM AXS POD (wireless electronic)
|
| Derailleur |
SRAM X0 Eagle AXS Transmission 12‑speed wireless electronic derailleur
|
| Cassette |
SRAM X0 Eagle Transmission 10‑52T
|
| Chain |
SRAM X0 Eagle Transmission Flattop
|
| Crankset |
Shimano STEPS EM9000 160 mm cranks
|
| Brakes |
SRAM Code RSC
|
| Brake discs |
SRAM CenterLine 220 mm
|
| Wheels |
DT Swiss HX1700 30mm
|
| Tires |
Front: Maxxis Assegai 2.5 EXO+; Rear: Maxxis Minion DHR II 2.4 DD
|
| Seat post |
SRAM Reverb AXS 31.6 mm dropper post (150 mm for S‑M, 170 mm for L‑XL)
|
| Saddle |
Silverado Custom saddle
|
| Stem |
BURGTEC ENDURO MK3 35 × 50 mm stem
|
| Handlebars |
YETI CARBON 35 × 800 mm handlebars
|
| Headset |
Cane Creek 40 integrated headset
|
| Sex | Men |
| Model year | 2024 |
| Gears | 1x12 |
| Groupset | SRAM X0 AXS |
| Size | L |
| Colour | blue |
| Material | carbon fiber |
| Wheel diameter | 29" |
| Drive | Shimano STePS EP8 |
| Battery | 630 Wh |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 170 mm |
| Rear travel | 160 mm |
| Dropper post | yes |
| Shock type | Air |
| Control type | electronic |
| product ID | 358218 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 165 cm | 165 - 180 cm | 178 - 191 cm | > 185 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews