Kellys Carson E 90
KELLYS e-Power Tour Profile frame
frame size M (500mm) / L (540mm) / XL (580mm)
e-bike system SHIMANO Steps E6000 / battery capacity 418Wh
computer SC-E 6100
fork SR SUNTOUR NEX DX, 63mm, coil spring (threaded steerer 28.6mm)
head. composition semi-integrated
cranks SHIMANO FC-E6000 (38) - length 175mm
shifting SHIMANO Altus SL-M370 rear
shifter SHIMANO Alivio M4000 (direct mount)
number of gears 9
cassette pinion SHIMANO CS-HG300-9 (11-34)
KMC X9 chain (114 links)
brakes SHIMANO M365 Hydraulic Disc
brake discs front 160mm / rear 160mm Center Lock
brake levers SHIMANO BL-M365
hubs SHIMANO TX505 Disc Center Lock (36 holes)
rims KLS Scart 622x20 (36 holes / riveted)
string UCP steel
tires SCHWALBE Energizer Life 47-622 (28x1.75) ReflectiveLine
stem KALLOY Uno - adjustable - diam 25.4mm / length 90mm
handlebars KALLOY RiseBar - diam 25.4mm / width 600mm
KLS Wave ergonomic handles
suspension seatpost - diam 31.6mm / length 300mm
saddle SELLE ROYAL Lookin
pedals VP NonSlip - plastic
BUCHEL Urban front lighting
rear lighting BUCHEL LED Champs-Elysess
fenders RPZ
accessories carrier, stand, bell
Model year | 2019 |
Gears | 1x9 |
Material | aluminium |
Drive | Shimano STePS E6000 |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
Fork | Spring |
product ID | 53934 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews