Haibike Trekking 6 i500Wh LowStep Deore 21 cool grey/neon yellow
Engine: Yamaha PW-SE System, 250W, 70nm, 25km/h
Display: Yamaha Multi Switch 2.8" TFT, 16 functions
Battery: Yamaha InTube, 500 Wh
Charger: Yamaha fast charger 4A
Fork: Suntour NEX E25, steel spring, travel: 63mm, steel post 1 1/8" - 1 1/2" weakened, quick release
Shifting: Shimano Deore M5120, 10-speed
Control lever: Shimano Deore M4100, Trigger controller
Cassette: Shimano HG41, 11-46 teeth
Chain: KMC e10S
Converter: 38, steel
Brake lever: Tektro T275, aluminum
Brake (front): Tektro T275, 180mm, aluminum, 2-piston disc brake
Brake (rear): Tektro T275, 160mm, aluminum, 2-piston disc brake
Tires: Continental Contact Urban, 55x584, reflective stripes
Rim: Schürmann Yak25, riveted, hollow rim, aluminum
Front hub: Haibike Components TheHub ++ Fixed axle 15x100mm
Rear hub: Haibike TheHub ++ Steckachse 12x148mm
Tip: SAPI Leader, black
Handlebars: XLC Topflat 720mm
Grips: XLC Comfort BO3 Comfort BO2, with wrist rest
Stem: XLC Alu, A-head
Head Composition: Cane Creek Viscoset, aluminum
Saddle: XLC MTB
Seatpost: XLC, 31.6mm, aluminum
Pedals: VP E461, aluminum
Headlight: Haibike Skybeamer 150, 50 lux
Rear light: AXA Blueline
Dynamo: Via the system battery
Carrier: StandWell KM040
Mudguards: SKS, chromoplasts
Stand: Ursus Mooi, adjustable
Permitted total weight: 130kg
Wheel size: 27.5"
Model year | 2021 |
Gears | 1x10 |
Material | aluminium |
Drive | Yamaha |
Battery | 500 Wh |
Brakes | Hydraulic disc brakes |
product ID | 119213 |
The table is indicative. On the manufacturer's website, you will find geometry and an accurate calculator for each model, which calculates the size based on height, leg and arm length, and preferred riding style.
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 159 - 170 | 168 - 179 | 177 - 188 | 186 - 196 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews